![EAC](Https://upload.wikimedia.org/wikipedia/commons/3/36/EAC-black-on-white.gif)
The Eurasian Conformity mark (EAC, Russian: Евразийское соответствие (ЕАС)) is a certification mark to indicate products that conform to all technical regulations of the Eurasian Customs Union. It means that the EAC-marked products meet all requirements of the corresponding technical regulations and have passed all conformity assessment procedures.[citation needed][1][2][failed verification]
![](Https://upload.wikimedia.org/wikipedia/commons/thumb/f/f4/%D0%97%D0%BD%D0%B0%D0%BA_%D1%81%D0%BE%D0%BE%D1%82%D0%B2%D0%B5%D1%82%D1%81%D1%82%D0%B2%D0%B8%D1%8F.svg/220px-%D0%97%D0%BD%D0%B0%D0%BA_%D1%81%D0%BE%D0%BE%D1%82%D0%B2%D0%B5%D1%82%D1%81%D1%82%D0%B2%D0%B8%D1%8F.svg.png)
Before this marking came into use, the prevalent product marking was GOST R 50460-92: Mark of conformity for mandatory certification.
History
[edit]Originally, the conformity assessment of the products, which were brought on the market of the USSR or Russia for the first time, was defined by GOST and TR standards.
From July 1, 2010, the Customs Code of the Customs Union between Russia, Belarus and Kazakhstan entered into force. The new Customs Code should replace the existing national certification rules such as Russian GOST-R, TR or Kazakh GOST-K standards by the uniform technical regulations and technical guidelines of the Customs Union.
Products, which thus meet the requirements of the technical regulations of the Customs Union or the Eurasian Economic Union (EAEU) (consisting of Russia, Belarus, Armenia, Kazakhstan, Kyrgyzstan), are marked with the EAC mark. The uniform EAC marking of the customs union was defined by the board decision of the EAEU Commission No. 711 of July 15, 2011.
The term TR marking in conjunction with the conformity assurance with the technical regulations of the CU or EAEU is therefore incorrect. Since February 2010, the new list of products subject to certification and declaration has been valid for the GOST-regulated area. In accordance with Federal Law No. 385 of December 30, 2009 On amendments to the Federal Law on Technical Regulation, the original deadline for 2010 was lifted on the personal request of the former President of Russia, Dmitry Medvedev, and the following items were ordered:
- To simplify the procedure for the introduction or modification of the TR in Russia (Ministry of Industry and Trade)
- To permit the application of international or foreign standards and guidelines (official translation, expertise by the standard authority, registration in the state standard information depot)
- To develop additional technical regulations without time limit
Development and function of EAC marking
[edit]The EAC marking has been created to ensure the product safety for the final consumer. The board decision of the Customs Union of June 18, 2010, the Customs Union Convention of November 18, 2010, and the board decision of the Customs Union of April 7, 2011 provide the legal framework for numerous products of safety and health requirements as minimum requirements, which must not be undercut. A product may only be put into circulation for the first time in the field of EAEU and must be put into operation for the first time if it complies with the essential requirements of all applicable technical regulations. Some of the methods provided for this purpose are:
- EAC declaration
- EAC certification
- State registration
With the EAC marking, the manufacturer indicates the conformity of the product with the basic requirements according to the applicable technical regulations. The manufacturer of the product is responsible for this marking (a representative authorized in the EAEU is required for manufacturers outside the EAEU). To the extent that the manufacturer has not complied with his duty outside the EAEU, this obligation is transferred to the authorized representative in the EAEU, and ultimately on the importer into the EAEU.
Important features of EAC marking
[edit]- Products which are subject to one or more technical regulations because of their nature must be marked with the EAC marking before being placed on the market or put into service for the first time. All applicable technical regulations must be taken into account.
- Manufacturers of a product are responsible for which technical regulations they must apply during production.
- The product may only be placed on the market and put into service if it complies with the provisions of all technical regulations applicable at the present time, and it is provided that the conformity assessment has been carried out in accordance with all applicable technical regulations.
- The manufacturer shall attach the EAC marking to the product.
- If required, an authorized body must be involved in the conformity assessment.
- In addition to the EAC marking, no other mark or seal of approval is permitted, which could call into question the statement of the "EAC".
- The EAC marking confirms full compliance with the "Basic Safety Requirements", which are specified in the Technical Regulations.
Attachment of EAC marking
[edit]The EAC marking shall be put onto the product or to the attached label in a visible, legible, distinctive and permanent manner by the manufacturer or his authorized representative in the EAEU. The size must be at least 5 mm; the proportions must be respected if the EAC marking is reduced or enlarged. If the nature of the product does not allow it, it shall be put onto the package (if any) and the accompanying documents. The EAC marking may only be carried out when all the requirements of the technical regulations applicable to the corresponding product have been met this includes EAC Certified lighting products for use in hazardous areas.[3]
Application area
[edit]The EAC marking is the prerequisite for the initial placing on the market in all member-states of the Eurasian Economic Union. The EAEU includes Russia, Belarus, Armenia, Kazakhstan and Kyrgyzstan.
Technical regulations
[edit]For the following product groups there are technical regulations of the CU or EAEU as basis for the EAC marking.
Technical regulations of Customs Union and Eurasian Economic Union
[edit]Source:[4]
Status | In force on | Number | Name of the Technical Regulation |
---|---|---|---|
Valid | 15.02.2012 | TR CU 006/2011 | On safety of pyrotechnic products |
Valid | 01.06.2012 | TR CU 019/2011[5] | On safety of personal protective equipment |
Valid | 01.07.2012 | TR CU 005/2011 | On safety of packaging |
Valid | 01.07.2012 | TR CU 007/2011[6] | On safety of the products for children and teenagers |
Valid | 01.07.2012 | TR CU 008/2011[7] | On safety of toys |
Valid | 01.07.2012 | TR CU 009/2011[8] | On safety of perfume and cosmetic products |
Valid | 01.07.2012 | TR CU 017/2011 | On safety of light industry products |
Valid | 31.12.2012 | TR CU 013/2011 | On requirements for motor and aviation gasoline, diesel and marine fuel, jet fuel and heating oil |
Valid | 15.02.2013 | TR CU 004/2011[9] | On safety of low-voltage equipment |
Valid | 15.02.2013 | TR CU 010/2011[10] | On safety of machinery and equipment |
Valid | 15.02.2013 | TR CU 011/2011 | On safety of elevators |
Valid | 15.02.2013 | TR CU 012/2011[11] | On safety of the equipment for work in explosive environment |
Valid | 15.02.2013 | TR CU 016/2011[12] | On safety of devices operating on the gaseous fuel |
Valid | 15.02.2013 | TR CU 020/2011[13] | Electromagnetic compatibility of hardware |
Valid | 01.07.2013 | TR CU 015/2011 | On safety of grain |
Valid | 01.07.2013 | TR CU 021/2011 | On safety of food products |
Valid | 01.07.2013 | TR CU 022/2011 | Food products in terms of their marking |
Valid | 01.07.2013 | TR CU 023/2011[14] | On fruit and vegetable juice products |
Valid | 01.07.2013 | TR CU 024/2011 | On fat and oil products |
Valid | 01.07.2013 | TR CU 027/2012 | On safety of certain types of specialized food products |
Valid | 01.07.2013 | TR CU 029/2012 | On safety of food additives, flavorings and technological processing aids |
Valid | 01.02.2014 | TR CU 032/2013[15] | On safety of equipment operating under excessive pressure |
Valid | 01.02.2014 | TR CU 026/2012 | On safety of small size vessels |
Valid | 01.03.2014 | TR CU 030/2012 | On safety of lubricants, oils and special fluids |
Valid | 01.05.2014 | TR CU 033/2013 | On safety of milk and dairy products |
Valid | 01.05.2014 | TR CU 034/2013 | On safety of meat and meat products |
Valid | 01.07.2014 | TR CU 025/2012 | On safety of furniture products |
Valid | 01.07.2014 | TR CU 028/2012 | On safety of explosives and products based on them |
Valid | 02.08.2014 | TR CU 001/2011[16] | On safety of railway rolling stock |
Valid | 02.08.2014 | TR CU 002/2011 | On safety of high speed rail transport |
Valid | 02.08.2014 | TR CU 003/2011 | On safety of railway transport infrastructure |
Valid | 01.01.2015 | TR CU 018/2011 | On safety of wheeled vehicles |
Valid | 15.02.2015 | TR CU 014/2011 | On safety of motor roads |
Valid | 15.02.2015 | TR CU 031/2012 | On safety of agricultural or forestry tractors and trailers for them |
Valid | 15.05.2016 | TR CU 035/2014 | On tobacco products |
Valid | 01.09.2017 | TR EAEU 040/2016 | On safety of fish products |
Valid | 01.01.2018 | TR EAEU 036/2016 | On requirements covering liquefied petroleum gases for their use as fuel |
Valid | 01.03.2018 | TR EAEU 037/2016 | On restriction of the use of dangerous substances in electrical engineering and electronic devices |
Valid | 18.04.2018 | TR EAEU 038/2016 | On safety of attractions |
Valid | 17.11.2018 | TR EAEU 042/2017 | On safety of children's playground |
Valid | 01.01.2019 | TR EAEU 044/2017 | On safety of bottled drinking water, including natural mineral water |
Valid | 01.07.2019 | TR EAEU 045/2017[17] | On safety of mineral oil |
Valid | 01.01.2020 | TR EAEU 043/2017[18] | On requirements for fire safety devices and fire-fighting equipment |
Valid | 02.06.2021 | TR EAEU 041/2017[19] | On safety of chemicals |
Adopted | unknown | TR EAEU 039/2016[20] | On requirements for mineral fertiliser |
See also
[edit]References
[edit]- ^ "EAC Marking".
- ^ о едином знаке обращения продукции на рынке государств - членов Таможенного союза (in Russian)
- ^ EAC approves certified hazardous area lightining with Russian certification
- ^ "Technical regulations in effect".
- ^ "TR CU 019/2011 On safety of personal protective equipment" (PDF). Retrieved 19 December 2022.
- ^ "TR CU 007/2011 On safety of the products for kids and teenagers" (PDF). Retrieved 19 December 2022.
- ^ "TR CU 008/2011 On safety of toys" (PDF). Retrieved 19 December 2022.
- ^ "TR CU 009/2011 On safety of perfumes and toiletries" (PDF). Retrieved 19 December 2022.
- ^ "TR CU 004/2011 On safety of low-voltage equipment" (PDF). Retrieved 19 December 2022.
- ^ "TR CU 010/2011 On safety of machinery and equipment" (PDF). Retrieved 19 December 2022.
- ^ "TR CU 012/2011 ex-proof | EAC ATEX". WWG. Retrieved 19 December 2022.
- ^ "TR CU 016/2011 On safety of appliances burning gaseous fuels" (PDF). Retrieved 19 December 2022.
- ^ "TR CU 020/2011 On electromagnetic compatibility of technical devices" (PDF). Retrieved 19 December 2022.
- ^ Technical Regulation of the Customs Union
- ^ "TR CU 032/2013 On safety of pressure equipment" (PDF).
- ^ "TR CU 001/2011 On safety of rail vehicles" (PDF). Retrieved 19 December 2022.
- ^ "TR EAEU 045/2017 On safety of mineral oil".
- ^ "TR EAEU 043/2017 On requirements for fire safety and fire extinguishing systems". Retrieved 19 December 2022.
- ^ "TR EAEU 041/2017 On safety of chemicals".
- ^ "TR EAEU 039/2016 On requirements for mineral fertilizer".