![](https://upload.wikimedia.org/wikipedia/commons/thumb/5/57/Syncrude_mildred_lake_plant.jpg/250px-Syncrude_mildred_lake_plant.jpg)
A tailings dam is typically an earth-fill embankment dam used to store byproducts of mining operations after separating the ore from the gangue. Tailings can be liquid, solid, or a slurry of fine particles, and are usually highly toxic and potentially radioactive. Solid tailings are often used as part of the structure itself.
Tailings dams rank among the largest engineered structures on earth. The Syncrude Mildred Lake Tailings Dyke in Alberta, Canada, is an embankment dam about 18 kilometres (11 mi) long and from 40 to 88 metres (131 to 289 ft) high. The dam and the artificial lake within it are constructed and maintained as part of ongoing operations by Syncrude in extracting oil from the Athabasca oil sands; it is the largest dam structure on earth by volume, and as of 2001 it was believed to be the largest earth structure in the world by volume of fill.[1]
There are key differences between tailings dams and the more familiar hydroelectric dams. Tailings dams are designed for permanent containment, meaning they are intended to "remain there forever".[2] Copper, gold, uranium and other mining operations produce varied kinds of waste, much of it toxic, which pose varied challenges for long-term containment.[3]
An estimated 3,500 active tailings impoundments stand around the world, although there is no complete inventory, and the total number is disputed. In an average year, it would be expected that between two and five "major" tailings dam failures would occur, along with 35 "minor" failures.[4] Assuming the 3,500 figure is correct, this failure rate is "more than two orders of magnitude higher than the failure rate of conventional water retention dams".[5] A 2020 assessment of responsible mining practices by the Responsible Mining Foundation, found that companies have made little or no progress in improving the documentation and safety practices of these ponds.[6]
Structure
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/0/01/Bituminous_geomembrane_installation_on_a_mine_tailings_storage_facility.jpg/220px-Bituminous_geomembrane_installation_on_a_mine_tailings_storage_facility.jpg)
Unlike water retention dams, the height of a tailings dam is typically increased (raised) throughout the life of the particular mine. Typically, a base or starter dam is constructed, and as it fills with a mixture of tailings and water, it is raised. Material used to raise the dam can include the tailings (if their properties are suitable), earthfill, or rockfill.[7] It is increasingly common for barrier systems such as geomembranes to be incorporated into tailings dams. Impermeable barriers can prevent or reduce seepage thereby increasing the geotechnical and environmental stability of the dam.[8]
![](https://upload.wikimedia.org/wikipedia/commons/thumb/9/97/The_Wheal_Jane_Tailings_Dam_-_geograph.org.uk_-_845826.jpg/250px-The_Wheal_Jane_Tailings_Dam_-_geograph.org.uk_-_845826.jpg)
There are three types of dam raises, the upstream, downstream and centerline, named according to the relative position of the new crest of the dam to the previous. The specific design used is dependent upon topography, geology, climate, the type of tailings, and cost. An upstream tailings dam consists of trapezoidal embankments being constructed on top but toe to crest of another, moving the crest further upstream. This creates a relatively flat downstream side and a jagged upstream side which is supported by tailings slurry in the impoundment. The downstream design refers to the successive raising of the embankment that positions the fill and crest further downstream. A centerlined dam has sequential embankment dams constructed directly on top of another while fill is placed on the downstream side for support and slurry supports the upstream side.[9][10]
Largest
[edit]The largest three tailings dams are:
Rank | Name[11] | Country | Year completed | Structure height [m] | Structure volume[12] [106 m3] | Reservoir volume [109 m3] | Installed capacity [MW] | Type |
---|---|---|---|---|---|---|---|---|
1 | Syncrude Tailings Dam Mildred MLSB[13] | ![]() |
1995 | 88 | 540[14]/720 | 0.35 | NA | TE |
2 | Syncrude Tailings Dam Mildred SWSS[15] | ![]() |
2010 | 40–50 | 119[14] | 0.25[14] | NA | TE |
3 | ASARCO Mission Mine Tailings Dam | ![]() |
1973 | 30[16] | 40.1 | 0[17] | NA | ER |
Type: TE – Earth; ER – Rock-fill; PG – Concrete gravity; CFRD – Concrete face rock fill
Concerns
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/a/a6/Brumadinho%2C_Minas_Gerais_%2847021723582%29.jpg/220px-Brumadinho%2C_Minas_Gerais_%2847021723582%29.jpg)
See also
[edit]References
[edit]- ^ Morgenstern, Norbert R. (19–20 September 2001). "Geotechnics and Mine Waste Management – Update" (PDF). Swedish Mining Association, Natur Vards Verket, European Commission. Retrieved 27 April 2014.
- ^ "Tailings Dams: Where Mining Waste is Stored Forever". FRONTLINE. Retrieved 28 January 2019.
- ^ Culbert, Lori (24 November 2001). "Story of a shattered life: A single childhood incident pushed Dawn Crey into a downward spiral – Vancouver Sun". Retrieved 28 January 2019.
- ^ Martin, T.E.; Davies, M.P. "Trends in the stewardship of tailings dams" (PDF). www.infomine.com. Archived from the original (PDF) on 21 November 2011. Retrieved 30 July 2020.
- ^ Azam, Shahad; Li, Qiren (December 2010). "Tailings Dam Failures: A Review of the Last One Hundred Years" (PDF). www.infomine.com. Archived from the original (PDF) on 26 November 2013. Retrieved 30 July 2020.
- ^ Antistatique. "Thematic Results | RMI Report 2020". 2020.responsibleminingindex.org. Retrieved 16 April 2021.
- ^ Blight, Geoffrey E. (1998). "Construction of Tailings Dams". Case studies on tailings management. Paris, France: International Council on Metals and the Environment. pp. 9–10. ISBN 1-895720-29-X. Retrieved 10 August 2011.
- ^ McLeod, Harvey; Bjelkevik, Annika (2021). TAILINGS DAM DESIGN Technology Update (PDF) (Report). ICOLD Committee on Tailings Dams. p. 91.
- ^ "Properties of Tailings Dams" (PDF). NBK Institute of Mining Engineering. Archived from the original (PDF) on 1 October 2011. Retrieved 10 August 2011.http://mining.ubc.ca/files/2013/03/Dirk-van-Zyl.pdf
- ^ Raj K. Singhal, ed. (2000). Environmental issues and management of waste in energy and mineral production: Proceedings of the Sixth International Conference on Environmental Issues and Management of Waste in Energy and Mineral Production: SWEMP 2000; Calgary, Alberta, Canada, May 30 – June 2, 2000. Rotterdam: Balkema. pp. 257–260. ISBN 90-5809-085-X. Retrieved 9 November 2015.
- ^ Talk:List of largest dams in the world#Phantom Dams
- ^ Talk:List of largest dams in the world#Structure Volume
- ^ D. Nicol (1994) "The Syncrude Mildred Lake Tailings Dyke Redesign", 18th Int. Congr. Large Dams.
- ^ a b c Estimate based on height, dimensions from Google Earth and, where available, cross section. Accuracy ±15%
- ^ "Microsoft Word – Baseline Report on Fluid Deposits revE" (PDF). Retrieved 16 February 2011.
- ^ Estimate based on structure volume and dimensions from Google Earth
- ^ Zero reservoir size because full of tailings
- ^ Azam, Shahad; Li, Qiren (December 2010). "Tailings Dam Failures: A Review of the Last One Hundred Years" (PDF). www.infomine.com. Archived from the original (PDF) on 26 November 2013. Retrieved 30 July 2020.
- ^ David M Chambers, "Long Term Risk of Releasing Potentially Acid Producing Waste Due to Tailings Dam Failure". Center for Science in Public Participation. Page 3 of 12. CSP2.org
Well, that’s interesting to know that Psilotum nudum are known as whisk ferns. Psilotum nudum is the commoner species of the two. While the P. flaccidum is a rare species and is found in the tropical islands. Both the species are usually epiphytic in habit and grow upon tree ferns. These species may also be terrestrial and grow in humus or in the crevices of the rocks.
View the detailed Guide of Psilotum nudum: Detailed Study Of Psilotum Nudum (Whisk Fern), Classification, Anatomy, Reproduction