Cannabaceae

n-Butylamine
Skeletal formula of n-butylamine
Ball-and-stick model of the n-butylamine molecule
Names
Preferred IUPAC name
Butan-1-amine
Other names
  • 1-Aminobutane
  • 1-Butanamine
  • Monobutylamine
Identifiers
3D model (JSmol)
Abbreviations NBA
605269
ChEBI
ChEMBL
ChemSpider
DrugBank
ECHA InfoCard 100.003.364 Edit this at Wikidata
EC Number
  • 203-699-2
1784
MeSH n-butylamine
RTECS number
  • EO29750002
UNII
UN number 1125
  • InChI=1S/C4H11N/c1-2-3-4-5/h2-5H2,1H3 checkY
    Key: HQABUPZFAYXKJW-UHFFFAOYSA-N checkY
  • CCCCN
Properties
C4H11N
Molar mass 73.139 g·mol−1
Appearance Colorless liquid
Odor fishy, ammoniacal
Density 740 mg ml−1
Melting point −49 °C; −56 °F; 224 K
Boiling point 77 to 79 °C; 170 to 174 °F; 350 to 352 K
Miscible
log P 1.056
Vapor pressure 9.1 kPa (at 20 °C)
570 μmol Pa−1 kg−1
Basicity (pKb) 3.22
-58.9·10−6 cm3/mol
1.401
Viscosity 500 µPa s (at 20 °C)
Thermochemistry
188 J K−1 mol−1
−128.9–−126.5 kJ mol−1
−3.0196–−3.0174 MJ mol−1
Hazards
GHS labelling:
GHS02: Flammable GHS05: Corrosive GHS07: Exclamation mark
Danger
H225, H302, H312, H314, H332
P210, P280, P305+P351+P338, P310
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 3: Liquids and solids that can be ignited under almost all ambient temperature conditions. Flash point between 23 and 38 °C (73 and 100 °F). E.g. gasolineInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
2
3
0
Flash point −7 °C (19 °F; 266 K)
312 °C (594 °F; 585 K)
Explosive limits 1.7–9.8%
Lethal dose or concentration (LD, LC):
  • 366 mg kg−1 (oral, rat)
  • 626 mg kg−1 (dermal, rabbit)
  • 430 mg kg−1 (oral, mouse)
  • 430 mg kg−1 (oral, guinea pig)
[2]
4000 ppm (rat, 4 hr)
263 ppm (mouse, 2 hr)[2]
NIOSH (US health exposure limits):
PEL (Permissible)
C 5 ppm (15 mg/m3) [skin][1]
REL (Recommended)
C 5 ppm (15 mg/m3) [skin][1]
IDLH (Immediate danger)
300 ppm[1]
Safety data sheet (SDS) hazard.com
Related compounds
Related alkanamines
Related compounds
2-Methyl-2-nitrosopropane
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

n-Butylamine is an organic compound (specifically, an amine) with the formula CH3(CH2)3NH2. This colourless liquid is one of the four isomeric amines of butane, the others being sec-butylamine, tert-butylamine, and isobutylamine. It is a liquid having the fishy, ammonia-like odor common to amines. The liquid acquires a yellow color upon storage in air. It is soluble in all organic solvents. Its vapours are heavier than air and it produces toxic oxides of nitrogen during combustion.[3]

Synthesis and reactions[edit]

It is produced by the reaction of ammonia and alcohols over alumina:

CH3(CH2)3OH + NH3 → CH3(CH2)3NH2 + H2O

n-Butylamine is a weak base. The pKa of [CH3(CH2)3NH3]+ is 10.78.[4]

n-Butylamine exhibits reactions typical of other simple alkyl amines, i.e., alkylation, acylation, condensation with carbonyls. It forms complexes with metal ions, examples being cis- and trans-[PtI2(NH2Bu)2].[5]

Uses[edit]

This compound is used as an ingredient in the manufacture of pesticides (such as thiocarbazides), pharmaceuticals, and emulsifiers. It is also a precursor for the manufacture of N,N′-dibutylthiourea, a rubber vulcanization accelerator, and n-butylbenzenesulfonamide, a plasticizer of nylon. It is used in the synthesis of fengabine, the fungicide benomyl, and butamoxane, and the antidiabetic tolbutamide.[6]

Butylamine is a precursor to the fungicide benomyl.

Safety[edit]

The LD50 to rats through the oral exposure route is 366 mg/kg.[7]

In regards to occupational exposures to n-butylamine, the Occupational Safety and Health Administration and National Institute for Occupational Safety and Health have set occupational exposure limits at a ceiling of 5 ppm (15 mg/m3) for dermal exposure.[8]

References[edit]

  1. ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0079". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ a b "N-Butylamine". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  3. ^ PubChem. "Butylamine". pubchem.ncbi.nlm.nih.gov. Retrieved 2022-02-15.
  4. ^ H. K. Hall, Jr. (1957). "Correlation of the Base Strengths of Amines". J. Am. Chem. Soc. 79 (20): 5441–5444. doi:10.1021/ja01577a030.
  5. ^ Rochon, Fernande D.; Buculei, Viorel (2004). "Multinuclear NMR Study and Crystal Structures of Complexes of the Types cis- and trans-Pt(amine)2I2". Inorganica Chimica Acta. 357 (8): 2218–2230. doi:10.1016/j.ica.2003.10.039.
  6. ^ Karsten Eller, Erhard Henkes, Roland Rossbacher, Hartmut Höke, "Amines, Aliphatic" Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005.doi:10.1002/14356007.a02_001
  7. ^ "n-Butylamine MSDS" (PDF). Archived from the original (PDF) on 2013-11-12. Retrieved 2013-11-12.
  8. ^ CDC - NIOSH Pocket Guide to Chemical Hazards

External links[edit]

One thought on “Cannabaceae

  1. Well, that’s interesting to know that Psilotum nudum are known as whisk ferns. Psilotum nudum is the commoner species of the two. While the P. flaccidum is a rare species and is found in the tropical islands. Both the species are usually epiphytic in habit and grow upon tree ferns. These species may also be terrestrial and grow in humus or in the crevices of the rocks.
    View the detailed Guide of Psilotum nudum: Detailed Study Of Psilotum Nudum (Whisk Fern), Classification, Anatomy, Reproduction

Leave a Reply