Cannabaceae

Iron(II) molybdate
Names
IUPAC name
Iron(II) molybdate
Identifiers
3D model (JSmol)
  • InChI=1S/Fe.Mo.4O/q+2;;;;2*-1
    Key: QQOCLJJWXLOEJE-UHFFFAOYSA-N
  • [O-][Mo](=O)(=O)[O-].[Fe+2]
Properties
FeMoO4
Molar mass 215.78 g/mol
Appearance Tan brown powder or crystals [1]
Density 5.6 g/cm3 (20 °C)
Melting point 1,115 °C (2,039 °F; 1,388 K)
0.00766 g/100 mL (20 °C)
0.038 g/100 mL (100 °C)
Thermochemistry
118.5 J/mol K
-1075 KJ/mol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Iron(II) molybdate is an inorganic compound with the chemical formula FeMoO4.[2]

Synthesis

[edit]

Iron(II) molybdate is prepared by the reaction of iron(II) chloride or iron(II) sulfate[3] and sodium molybdate.

Na2MoO4 + FeSO4 → Na2SO4 + FeMoO4
Na2MoO4 + FeCl2 → 2 NaCl + FeMoO4

Due to its very low aqueous solubility, iron(II) molybdate precipitates out as a brown powder from the above reactions, which can then be obtained by filtration.

Applications

[edit]

FeMoO4 has been used as relatively stable active material for anodes in Li-ion batteries for conversion reaction,[4] as anode material in aqueous supercapacitors due to fast redox reactions[3] and as catalyst for oxygen evolution in alkaline solutions.[5]

Safety

[edit]

Iron(II) molybdate is toxic and may cause irritation. It should not be released into the environment. Inhalation of dusts should be avoided.

References

[edit]
  1. ^ "Iron(II) Molybdate". American Elements. Archived from the original on 2023-01-17. Retrieved 2023-01-17.
  2. ^ University of Akron Chemical Database[permanent dead link]
  3. ^ a b Senthilkumar, Baskar; Kalai Selvan, Ramakrishnan (2014-07-15). "Hydrothermal synthesis and electrochemical performances of 1.7 V NiMoO4⋅xH2O||FeMoO4 aqueous hybrid supercapacitor". Journal of Colloid and Interface Science. 426: 280–286. doi:10.1016/j.jcis.2014.04.010. PMID 24863794.
  4. ^ Zhang, Zhenyu; Li, Wenyue; Ng, Tsz-Wai; Kang, Wenpei; Lee, Chun-Sing; Zhang, Wenjun (2015-10-13). "Iron(ii) molybdate (FeMoO4) nanorods as a high-performance anode for lithium ion batteries: structural and chemical evolution upon cycling". J. Mater. Chem. A. 3 (41): 20527–20534. doi:10.1039/c5ta05723j. ISSN 2050-7496.
  5. ^ Singh, R. N.; Singh, J. P.; Singh, A. (2008-08-01). "Electrocatalytic properties of new spinel-type MMoO4 (M = Fe, Co and Ni) electrodes for oxygen evolution in alkaline solutions". International Journal of Hydrogen Energy. 33 (16): 4260–4264. doi:10.1016/j.ijhydene.2008.06.008.

One thought on “Cannabaceae

  1. Well, that’s interesting to know that Psilotum nudum are known as whisk ferns. Psilotum nudum is the commoner species of the two. While the P. flaccidum is a rare species and is found in the tropical islands. Both the species are usually epiphytic in habit and grow upon tree ferns. These species may also be terrestrial and grow in humus or in the crevices of the rocks.
    View the detailed Guide of Psilotum nudum: Detailed Study Of Psilotum Nudum (Whisk Fern), Classification, Anatomy, Reproduction

Leave a Reply