In radiation thermodynamics, a hohlraum (German: [ˈhoːlˌʁaʊ̯m] ; a non-specific German word for a "hollow space", "empty room", or "cavity") is a cavity whose walls are in radiative equilibrium with the radiant energy within the cavity. First proposed by Gustav Kirchhoff in 1860 and used in the study of black-body radiation (hohlraumstrahlung),[1] this idealized cavity can be approximated in practice by a hollow container of any opaque material. The radiation escaping through a small perforation in the wall of such a container will be a good approximation of black-body radiation at the temperature of the interior of the container.[2] Indeed, a hohlraum can even be constructed from cardboard, as shown by Purcell's Black Body Box, a hohlraum demonstrator.[3]
In spectroscopy, the Hohlraum effect occurs when an object achieves thermodynamic equilibrium with an enclosing hohlraum. As a consequence of Kirchhoff’s law, everything optically blends together and contrast between the walls and the object effectively disappears.[4]
Applications
[edit]Hohlraums are used in High Energy Density Physics (HEDP) and Inertial Confinement Fusion (ICF) experiments to convert laser energy to thermal x-rays for imploding capsules, heating targets, and generating thermal radiation waves.[5] They may also be used in Nuclear Weapon designs.
Inertial confinement fusion
[edit]![](https://upload.wikimedia.org/wikipedia/commons/thumb/2/29/Nif_hohlraum.jpg/150px-Nif_hohlraum.jpg)
The indirect drive approach to inertial confinement fusion is as follows: the fusion fuel capsule is held inside a cylindrical hohlraum. The hohlraum body is manufactured using a high-Z (high atomic number) element, usually gold or uranium. Inside the hohlraum is a fuel capsule containing deuterium and tritium (D-T) fuel. A frozen layer of D-T ice adheres inside the fuel capsule. The fuel capsule wall is synthesized using light elements such as plastic, beryllium, or high density carbon, i.e. diamond. The outer portion of the fuel capsule explodes outward when ablated by the x-rays produced by the hohlraum wall upon irradiation by lasers. Due to Newton's third law, the inner portion of the fuel capsule implodes, causing the D-T fuel to be supercompressed, activating a fusion reaction.
The radiation source (e.g., laser) is pointed at the interior of the hohlraum rather than at the fuel capsule itself. The hohlraum absorbs and re-radiates the energy as X-rays, a process known as indirect drive. The advantage to this approach, compared to direct drive, is that high mode structures from the laser spot are smoothed out when the energy is re-radiated from the hohlraum walls. The disadvantage to this approach is that low mode asymmetries are harder to control. It is important to be able to control both high mode and low mode asymmetries to achieve a uniform implosion.
The hohlraum walls must have surface roughness less than 1 micron, and hence accurate machining is required during fabrication. Any imperfection of the hohlraum wall during fabrication will cause uneven and non-symmetrical compression of the fuel capsule inside the hohlraum during inertial confinement fusion. Hence imperfection is to be carefully prevented so surface finishing is extremely important, as during ICF laser shots, due to intense pressure and temperature, results are highly susceptible to hohlraum texture roughness. The fuel capsule must be precisely spherical, with texture roughness less than one nanometer, for fusion ignition to start. Otherwise, instability will cause fusion to fizzle. The fuel capsule contains a small fill hole with less than 5 microns diameter to inject the capsule with D-T gas.
The X-ray intensity around the capsule must be very symmetrical to avoid hydrodynamic instabilities during compression. Earlier designs had radiators at the ends of the hohlraum, but it proved difficult to maintain adequate X-ray symmetry with this geometry. By the end of the 1990s, target physicists developed a new family of designs in which the ion beams are absorbed in the hohlraum walls, so that X-rays are radiated from a large fraction of the solid angle surrounding the capsule. With a judicious choice of absorbing materials, this arrangement, referred to as a "distributed-radiator" target, gives better X-ray symmetry and target gain in simulations than earlier designs.[6]
Nuclear weapon design
[edit]The term hohlraum is also used to describe the casing of a thermonuclear bomb following the Teller-Ulam design. The casing's purpose is to contain and focus the energy of the primary (fission) stage in order to implode the secondary (fusion) stage.
Notes and references
[edit]- ^ Harrison, Edward R. (March 1988). Black-Holes in History. Vol. 29. p. 87. Bibcode:1988QJRAS..29...87H. Retrieved June 28, 2024.
- ^ Allen, William H. (1965). Dictionary of Technical Terms for Aerospace Use. NASA SP-7. Vol. 7. NASA, Washington, D.C. p. 134. Bibcode:1965NASSP...7.....A. Retrieved June 27, 2024.
- ^ "Purcell's Black Body Box". Harvard Natural Sciences Lecture Demonstrations.
- ^ Mitchell, Herbert J.; Salvaggio, Carl (2003). "The MWIR and LWIR Spectral Signatures of Water and Associated Materials" (PDF). In Shen, Sylvia S.; Lewis, Paul E. (eds.). Algorithms and Technologies for Multispectral, Hyperspectral, and Ultraspectral Imagery IX. Vol. 5093. Proceedings of SPIE.
- ^ McClarren, Ryan G.; Tregillis, Ian L.; Urbatsch, Todd J.; Dodd, Evan S. (2021). "High-energy density hohlraum design using forward and inverse deep neural networks". Physics Letters A. doi:10.1016/j.physleta.2021.127243.
- ^ Hohlraum
External links
[edit]- NIF Hohlraum – High resolution picture at Lawrence Livermore National Laboratory.
Well, that’s interesting to know that Psilotum nudum are known as whisk ferns. Psilotum nudum is the commoner species of the two. While the P. flaccidum is a rare species and is found in the tropical islands. Both the species are usually epiphytic in habit and grow upon tree ferns. These species may also be terrestrial and grow in humus or in the crevices of the rocks.
View the detailed Guide of Psilotum nudum: Detailed Study Of Psilotum Nudum (Whisk Fern), Classification, Anatomy, Reproduction