Cannabis Ruderalis

thcscience_admin

Main article: List of ISO standards

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.[2]

This is a dynamic list and may never be able to satisfy particular standards for completeness. You can help by adding missing items with reliable sources.

ISO 8000 – ISO 8999[edit]

  • ISO 8000 Data quality
  • ISO 8002:1986 Mechanical vibrations – Land vehicles – Method for reporting measured data
  • ISO 8015:2011 Geometrical product specifications (GPS) – Fundamentals – Concepts, principles and rules
  • ISO 8041:2005 Human response to vibration - Measuring instrumentation
    • ISO 8041-1:2017 Part 1: General purpose vibration meters
  • ISO 8042:1988 Shock and vibration measurements – Characteristics to be specified for seismic pick-ups
  • ISO 8044:2015 Corrosion of metals and alloys – Basic terms and definitions
  • ISO 8048:1984 Technical drawings – Construction drawings – Representation of views, sections and cuts
  • ISO 8049:2016 Ferronickel shot - Sampling for analysis
  • ISO 8050:1988 Ferronickel ingots or pieces - Sampling for analysis
  • ISO 8062 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts
    • ISO 8062-1:2007 Part 1: Vocabulary
    • ISO/TS 8062-2:2013 Part 2: Rules
    • ISO 8062-3:2007 Part 3: General dimensional and geometrical tolerances and machining allowances for castings
    • ISO 8062-4:2017 Part 4: General tolerances for castings using profile tolerancing in a general datum system
  • ISO 8063 Information processing – Data interchange on 6,30 mm (0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi)
    • ISO 8063-1:1986 Part 1: Mechanical, physical and magnetic properties
    • ISO 8063-2:1986 Part 2: Track format and method of recording for data interchange in start/stop mode
  • ISO 8064:1985 Information processing – Reels for 12,7 mm (0,5 in) wide magnetic tapes – Sizes 16, 18 and 22
  • ISO/IEC 8072:1996 Information technology – Open systems interconnection – Transport service definition
  • ISO/IEC 8073:1997 Information technology – Open Systems Interconnection – Protocol for providing the connection-mode transport service
  • ISO 8088:1994 Equipment for olive cultivation and olive oil production – Vocabulary
  • ISO 8090:1990 Cycles – Terminology
  • ISO 8107:1993 Nuclear power plants - Maintainability - Terminology
  • ISO 8109:1990 Banking and related financial services – Securities – Format of Eurobonds
  • ISO 8114:1990 Textile machinery and accessories – Spindles for ring-spinning and doubling machines – List of equivalent terms
  • ISO 8116 Textile machinery and accessories – Beams for winding
    • ISO 8116-1:1995 Part 1: General vocabulary
  • ISO 8119 Textile machinery and accessories – Needles for knitting machines – Terminology
    • ISO 8119-1:1989 Part 1: Latch-type needles
    • ISO 8119-2:1989 Part 2: Bearded needles
    • ISO 8119-3:1992 Part 3: Compound needles
  • ISO 8147:1995 Shipbuilding and marine structures – Derrick rigs and component parts – Vocabulary
  • ISO 8152:1984 Earth-moving machinery – Operation and maintenance – Training of mechanics
  • ISO 8153 Aerospace fluid systems and components – Vocabulary
    • ISO 8153-1:2009 Part 1: Hose assemblies
  • ISO 8157:2015 Fertilizers and soil conditioners – Vocabulary
  • ISO 8159:1987 Textiles – Morphology of fibres and yarns – Vocabulary
  • ISO 8160:1987 Textiles – Textured filament yarns – Vocabulary
  • ISO 8178 Reciprocating internal combustion engines - Exhaust emission measurement
  • ISO 8180 Ductile iron pipelines – Polyethylene sleeving for site application
  • ISO 8199:2005 Water quality – General guidance on the enumeration of micro-organisms by culture
  • ISO/IEC 8208:2000 Information technology – Data communications – X.25 Packet Layer Protocol for Data Terminal Equipment
  • ISO/IEC 8211:1994 Information technology - Specification for a data descriptive file for information interchange
  • ISO 8217:2017 Petroleum products - Fuels (class F) - Specifications of marine fuels
  • ISO 8229:1991 Operations and baths relating to dry-cleaning machines – Vocabulary
  • ISO 8277:2013 Ships and marine technology – Pipework and machinery – Information transfer
  • ISO 8297:1994 Acoustics – Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment – Engineering method
  • ISO 8316:1987 Measurement of liquid flow in closed conduits – Method by collection of the liquid in a volumetric tank
  • ISO 8317:2015 Child-resistant packaging - Requirements and testing procedures for reclosable packages
  • ISO 8319 Orthopaedic instruments – Drive connections
    • ISO 8319-1:1996 Part 1: Keys for use with screws with hexagon socket heads
    • ISO 8319-2:1986 Part 2: Screwdrivers for single slot head screws, screws with cruciate slot and cross-recessed head screws
  • ISO/IEC 8326:1996 Information technology – Open Systems Interconnection – Session service definition
  • ISO/IEC 8327 Information technology – Open Systems Interconnection – Connection-oriented Session protocol
  • ISO 8330:2014 Rubber and plastics hoses and hose assemblies - Vocabulary
  • ISO 8333:1985 Liquid flow measurement in open channels by weirs and flumes – V-shaped broad-crested weirs
  • ISO 8343:1985 Ferronickel - Determination of silicon content - Gravimetric method
  • ISO/IEC 8348:2002 Information technology – Open Systems Interconnection – Network service definition
  • ISO 8362 Injection containers and accessories
    • ISO 8362-1:2009 Part 1: Injection vials made of glass tubing
    • ISO 8362-2:2015 Part 2: Closures for injection vials
    • ISO 8362-3:2001 Part 3: Aluminium caps for injection vials
    • ISO 8362-4:2011 Part 4: Injection vials made of moulded glass
    • ISO 8362-5:2016 Part 5: Freeze drying closures for injection vials
    • ISO 8362-6:2010 Part 6: Caps made of aluminium-plastics combinations for injection vials
    • ISO 8362-7:2006 Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part
  • ISO/TR 8363:1997 Measurement of liquid flow in open channels — General guidelines for selection of method [Withdrawn: replaced by ISO 18365]
  • ISO 8368:1999 Hydrometric determinations – Flow measurements in open channels using structures – Guidelines for selection of structure
  • ISO 8373:2012 Manipulating industrial robots – Vocabulary
  • ISO 8378 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad, 3,8 tpmm (96 tpi), on both sides
    • ISO 8378-1:1986 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 8378-2:1986 Part 2: Track format A
    • ISO 8378-3:1986 Part 3: Track format B
  • ISO 8384:2000 Ships and marine technology – Dredgers – Vocabulary
  • ISO 8388:1998 Knitted fabrics – Types – Vocabulary
  • ISO 8421 Fire protection - Vocabulary
    • ISO 8421-1:1987 Part 1: General terms and phenomena of fire
    • ISO 8421-2:1987 Part 2: Structural fire protection
    • ISO 8421-6:1987 Part 6: Evacuation and means of escape
    • ISO 8421-7:1987 Part 7: Explosion detection and suppression means
  • ISO 8422:2006 Sequential sampling plans for inspection by attributes
  • ISO 8423:2008 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
  • ISO 8429:1986 Optics and optical instruments – Ophthalmology – Graduated dial scale
  • ISO 8439:1990 Forms design - Basic layout
  • ISO 8440:1986 Location of codes in trade documents
  • ISO/IEC 8441 Information technology – High density digital recording (HDDR)
    • ISO/IEC 8441-1:1991 Part 1: Unrecorded magnetic tape for (HDDR) applications
    • ISO/IEC 8441-2:1991 Part 2: Guide for interchange practice
  • ISO 8459:2009 Information and documentation - Bibliographic data element directory for use in data exchange and enquiry
  • ISO 8462 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge using GCR recording at 394 ftpmm (10 000 ftpi), 39 cpmm (1 000 cpi)
    • ISO 8462-1:1986 Part 1: Mechanical, physical and magnetic properties
    • ISO 8462-2:1986 Part 2: Streaming mode
  • ISO/IEC 8473 Information technology – Protocol for providing the connectionless-mode network service
    • ISO/IEC 8473-1:1998 Protocol specification
    • ISO/IEC 8473-2:1996 Part 2: Provision of the underlying service by an ISO/IEC 8802 subnetwork
    • ISO/IEC 8473-3:1995 Provision of the underlying service by an X.25 subnetwork
    • ISO/IEC 8473-4:1995 Provision of the underlying service by a subnetwork that provides the OSI data link service
    • ISO/IEC 8473-5:1997 Provision of the underlying service by ISDN circuit-switched B-channels
  • ISO/IEC 8480:1995 Information technology – Telecommunications and information exchange between systems – DTE/DCE interface back-up control operation using ITU-T Recommendation V.24 interchange circuits
  • ISO/IEC 8481:1996 Information technology – Telecommunications and information exchange between systems – DTE to DTE direct connections
  • ISO/IEC 8482:1993 Information technology – Telecommunications and information exchange between systems – Twisted pair multipoint interconnections
  • ISO/IEC 8484:2014 Information technology – Magnetic stripes on savingsbooks
  • ISO 8485:1989 Programming languages - APL
  • ISO 8498:1990 Woven fabrics – Description of defects – Vocabulary
  • ISO 8499:2003 Knitted fabrics – Description of defects – Vocabulary
  • ISO 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness
    • ISO 8501-1:2007 Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
    • ISO 8501-2:1994 Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
    • ISO 8501-3:2006 Part 3: Preparation grades of welds, edges and other areas with surface imperfections
    • ISO 8501-4:2006 Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting
  • ISO 8502 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness
    • ISO 8502-2:2017 Part 2: Laboratory determination of chloride on cleaned surfaces
    • ISO 8502-3:2017 Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
    • ISO 8502-4:2017 Part 4: Guidance on the estimation of the probability of condensation prior to paint application
    • ISO 8502-5:1998 Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method
    • ISO 8502-6:2006 Part 6: Extraction of soluble contaminants for analysis - The Bresle method
    • ISO 8502-9:1998 Part 9: Field method for the conductometric determination of water-soluble salts
    • ISO 8502-11:2006 Part 11: Field method for the turbidimetric determination of water-soluble sulfate
  • ISO 8503 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates
    • ISO 8503-1:2012 Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
    • ISO 8503-2:2012 Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
    • ISO 8503-3:2012 Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure
    • ISO 8503-4:2012 Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure
    • ISO 8503-5:2017 Part 5: Replica tape method for the determination of the surface profile
  • ISO 8504 Preparation of steel substrates before application of paints and related products - Surface preparation methods
    • ISO 8504-1:2000 Part 1: General principles
    • ISO 8504-2:2000 Part 2: Abrasive blast-cleaning
    • ISO 8504-3:1993 Part 3: Hand- and power-tool cleaning
  • ISO 8512 Surface plates
    • ISO 8512-1:1990 Part 1: Cast iron
    • ISO 8512-2:1990 Part 2: Granite
  • ISO/TR 8517:1988 Rubber- or plastics-covered rollers – Glossary
  • ISO 8525:2008 Airborne noise emitted by machine tools – Operating conditions for metal-cutting machines
  • ISO 8528 Reciprocating internal combustion engine driven alternating current generating sets
    • ISO 8528-1:2005 Part 1: Application, ratings and performance
    • ISO 8528-2:2005 Part 2: Engines
    • ISO 8528-3:2005 Part 3: Alternating current generators for generating sets
    • ISO 8528-4:2005 Part 4: Controlgear and switchgear
    • ISO 8528-5:2013 Part 5: Generating sets
    • ISO 8528-6:2005 Part 6: Test methods
    • ISO 8528-7:2017 Part 7: Technical declarations for specification and design
    • ISO 8528-8:2016 Part 8: Requirements and tests for low-power generating sets
    • ISO 8528-9:2017 Part 9: Measurement and evaluation of mechanical vibrations
    • ISO 8528-10:1998 Part 10: Measurement of airborne noise by the enveloping surface method
    • ISO 8528-12:1997 Part 12: Emergency power supply to safety services
    • ISO 8528-13:2016 Part 13: Safety
  • ISO 8529 Reference neutron radiations
    • ISO 8529-1:2001 Part 1: Characteristics and methods of production
    • ISO 8529-2:2000 Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field
    • ISO 8529-3:1998 Part 3: Calibration of area and personal dosimeters and determination of response as a function of energy and angle of incidence
  • ISO 8532:1995 Securities – Format for transmission of certificate numbers
  • ISO 8536 Infusion equipment for medical use
    • ISO 8536-1:2011 Part 1: Infusion glass bottles
    • ISO 8536-2:2010 Part 2: Closures for infusion bottles
    • ISO 8536-3:2009 Part 3: Aluminium caps for infusion bottles
    • ISO 8536-4:2010 Part 4: Infusion sets for single use, gravity feed
    • ISO 8536-5:2004 Part 5: Burette infusion sets for single use, gravity feed
    • ISO 8536-6:2016 Part 6: Freeze drying closures for infusion bottles
    • ISO 8536-7:2009 Part 7: Caps made of aluminium-plastics combinations for infusion bottles
    • ISO 8536-8:2015 Part 8: Infusion sets for single use with pressure infusion apparatus
    • ISO 8536-9:2015 Part 9: Fluid lines for single use with pressure infusion equipment
    • ISO 8536-10:2015 Part 10: Accessories for fluid lines for single use with pressure infusion equipment
    • ISO 8536-11:2015 Part 11: Infusion filters for single use with pressure infusion equipment
    • ISO 8536-12:2007 Part 12: Check valves
    • ISO 8536-13:2016 Part 13: Graduated flow regulators for single use with fluid contact
    • ISO 8536-14:2016 Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
  • ISO 8537:2016 Sterile single-use syringes, with or without needle, for insulin
  • ISO 8540:1993 Open front mechanical power presses - Vocabulary
  • ISO 8548 Prosthetics and orthotics – Limb deficiencies
    • ISO 8548-1:1989 Part 1: Method of describing limb deficiencies present at birth
    • ISO 8548-2:1993 Part 2: Method of describing lower limb amputation stumps
    • ISO 8548-3:1993 Part 3: Method of describing upper limb amputation stumps
    • ISO 8548-4:1998 Part 4: Description of causal conditions leading to amputation
    • ISO 8548-5:2003 Part 5: Description of the clinical condition of the person who has had an amputation
  • ISO 8549 Prosthetics and orthotics - Vocabulary
    • ISO 8549-1:1989 Part 1: General terms for external limb prostheses and external orthoses
    • ISO 8549-2:1989 Part 2: Terms relating to external limb prostheses and wearers of these prostheses
    • ISO 8549-3:1989 Part 3: Terms relating to external orthoses
    • ISO 8549-4:2014 Part 4: Terms relating to limb amputation
  • ISO/TR 8550 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots
    • ISO/TR 8550-1:2007 Part 1: Acceptance sampling
    • ISO/TR 8550-2:2007 Part 2: Sampling by attributes
    • ISO/TR 8550-3:2007 Part 3: Sampling by variables
  • ISO 8551:2003 Prosthetics and orthotics – Functional deficiencies – Description of the person to be treated with an orthosis, clinical objectives of treatment, and functional requirements of the orthosis
  • ISO 8552:2004 Milk – Estimation of psychrotrophic microorganisms – Colony-count technique at 21 degrees C (Rapid method)
  • ISO 8553:2004 Milk – Enumeration of microorganisms – Plate-loop technique at 30 degrees C
  • ISO 8559:1989 Garment construction and anthropometric surveys – Body dimensions [Withdrawn: replaced by ISO 8559-1:2017]
  • ISO 8559 Size designation of clothes
    • ISO 8559-1:2017 Part 1: Anthropometric definitions for body measurement
    • ISO 8559-2:2017 Part 2: Primary and secondary dimension indicators
  • ISO 8560:1986 Technical drawings – Construction drawings – Representation of modular sizes, lines and grids
  • ISO 8568:2007 Mechanical shock – Testing machines – Characteristics and performance
  • ISO 8571 Information processing systems - Open Systems Interconnection - File Transfer, Access and Management
    • ISO 8571-1:1988 Part 1: General introduction
    • ISO 8571-2:1988 Part 2: Virtual Filestore Definition
    • ISO 8571-3:1988 Part 3: File Service Definition
    • ISO 8571-4:1988 Part 4: File Protocol Specification
    • ISO/IEC 8571-5:1990 Part 5: Protocol Implementation Conformance Statement Proforma
  • ISO 8573 Compressed air
    • ISO 8573-1:2010 Contaminants and purity classes
    • ISO 8573-2:2007 Test methods for oil aerosol content
    • ISO 8573-3:1999 Test methods for measurement of humidity
    • ISO 8573-4:2001 Test methods for solid particle content
    • ISO 8573-5:2001 Test methods for oil vapour and organic solvent content
    • ISO 8573-6:2003 Test methods for gaseous contaminant content
    • ISO 8573-7:2003 Test method for viable microbiological contaminant content
    • ISO 8573-8:2004 Test methods for solid particle content by mass concentration
    • ISO 8573-9:2004 Test methods for liquid water content
  • ISO 8579 Acceptance code for gear units
    • ISO 8579-1:2002 Part 1: Test code for airborne sound
  • ISO 8583 Financial transaction card originated messages – Interchange message specifications
  • ISO 8586:2012 Sensory analysis – General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors
  • ISO 8596:2009 Ophthalmic optics – Visual acuity testing – Standard optotype and its presentation
  • ISO 8598 Optics and optical instruments – Focimeters
    • ISO 8598-1:2014 Part 1: General purpose instruments
  • ISO 8600 Endoscopes – Medical endoscopes and endotherapy devices[Note 3]
    • ISO 8600-1:2015 Part 1: General requirements
    • ISO 8600-2:2015 Part 2: Particular requirements for rigid bronchoscopes
    • ISO 8600-3:1997 Part 3: Determination of field of view and direction of view of endoscopes with optics
    • ISO 8600-4:2014 Part 4: Determination of maximum width of insertion portion
    • ISO 8600-5:2005 Part 5: Determination of optical resolution of rigid endoscopes with optics
    • ISO 8600-6:2005 Part 6: Vocabulary
    • ISO 8600-7:2012 Part 7: Basic requirements for medical endoscopes of water-resistant type
  • ISO 8601:2019 Data elements and interchange formats – Information interchange – Representation of dates and times
  • ISO/IEC 8602:1995 Information technology – Protocol for providing the OSI connectionless-mode transport service
  • ISO 8604:1988 Plastics – Prepregs – Definitions of terms and symbols for designations
  • ISO 8608:2016 Mechanical vibration – Road surface profiles – Reporting of measured data
  • ISO 8612:2009 Ophthalmic instruments – Tonometers
  • ISO/IEC 8613 Information technology – Open Document Architecture (ODA) and interchange format
  • ISO 8614:1997 Ski bindings – Vocabulary
  • ISO 8615:1991 Implants for surgery – Fixation devices for use in the ends of the femur in adults
  • ISO 8624:2011 Ophthalmic optics – Spectacle frames – Measuring system and terminology
  • ISO 8625 Aerospace – Fluid systems – Vocabulary
    • ISO 8625-1:1993 Part 1: General terms and definitions related to pressure
    • ISO 8625-2:1991 Part 2: General terms and definitions relating to flow
    • ISO 8625-3:1991 Part 3: General terms and definitions relating to temperature
    • ISO 8625-4:2011 Part 4: General terms and definitions relating to control/actuation systems
  • ISO 8626:1989 Servo-hydraulic test equipment for generating vibration – Method of describing characteristics
  • ISO 8630 Information processing – Data interchange on 130 mm (5.25 in) flexible disk cartridges using modified frequency modulation recording at 13 262 ftprad, on 80 tracks on each side
    • ISO 8630-1:1987 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 8630-2:1987 Part 2: Track format A for 77 tracks
    • ISO 8630-3:1987 Part 3: Track format B for 80 tracks
  • ISO/IEC 8631:1989 Information technology - Program constructs and conventions for their representation
  • ISO/IEC 8632 Information technology – Computer graphics – Metafile for the storage and transfer of picture description information
    • ISO/IEC 8632-1:1999 Part 1: Functional specification
    • ISO/IEC 8632-2:1992 Part 2: Character encoding [withdrawn 2001-06-21]
    • ISO/IEC 8632-3:1999 Part 3: Binary encoding
    • ISO/IEC 8632-4:1999 Part 4: Clear text encoding
  • ISO 8637:2010 Cardiovascular implants and extracorporeal systems – Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators
  • ISO 8638:2010 Cardiovascular implants and extracorporeal systems – Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters
  • ISO 8640 Textile machinery and accessories – Flat warp knitting machines[Note 3]
    • ISO 8640-1:2004 Part 1: Vocabulary of basic structure and knitting elements
    • ISO 8640-2:2004 Part 2: Vocabulary of warp let-off, fabric take-up and batching
    • ISO 8640-3:2002 Part 3: Vocabulary of patterning devices
    • ISO 8640-4:1996 Part 4: Stitch bonding machines and stitch bonding devices
  • ISO 8648:1988 Information processing systems – Open Systems Interconnection – Internal organization of the Network Layer
  • ISO/IEC 8650 Information technology – Open Systems Interconnection – Protocol specification for the Association Control Service Element
    • ISO/IEC 8650-2:1997 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 8651 Information technology – Computer graphics – Graphical Kernel System (GKS) language bindings[Note 3]
    • ISO 8651-1:1988 Part 1: FORTRAN
    • ISO 8651-2:1988 Part 2: Pascal
    • ISO 8651-3:1988 Part 3: Ada
    • ISO/IEC 8651-4:1995 Part 4: C
  • ISO/IEC 8652:2012 Information technology – Programming languages – Ada
  • ISO 8653:1986 Jewellery – Ring-sizes – Definition, measurement and designation
  • ISO 8655 Piston-operated volumetric apparatus
    • ISO 8655-1:2002 Part 1: Terminology, general requirements and user recommendations
    • ISO 8655-2:2002 Part 2: Piston pipettes
    • ISO 8655-3:2002 Part 3: Piston burettes
    • ISO 8655-4:2002 Part 4: Dilutors
    • ISO 8655-5:2002 Part 5: Dispensers
    • ISO 8655-6:2002 Part 6: Gravimetric methods for the determination of measurement error
    • ISO 8655-7:2005 Part 7: Non-gravimetric methods for the assessment of equipment performance
  • ISO 8669 Urine collection bags
    • ISO 8669-1:1988 Part 1: Vocabulary
  • ISO 8670 Ostomy collection bags
    • ISO 8670-1:1988 Part 1: Vocabulary
  • ISO 8691 Petroleum products – Low levels of vanadium in liquid fuels – Determination by flameless atomic absorption spectrometry after ashing
  • ISO 8695:2010 Tools for pressing - Punches - Nomenclature and terminology
  • ISO/TR 8713:2012 Electrically propelled road vehicles – Vocabulary
  • ISO 8769:2016 Reference sources - Calibration of surface contamination monitors - Alpha-, beta- and photon emitters
  • ISO 8777:1993 Information and documentation - Commands for interactive text searching
  • ISO 8784 Pulp, paper and board – Microbiological examination
    • ISO 8784-1:2014 Part 1: Enumeration of bacteria and bacterial spores based on disintegration
  • ISO 8785:1998 Geometrical Product Specification (GPS) - Surface imperfections - Terms, definitions and parameters
  • ISO 8790:1987 Information processing systems - Computer system configuration diagram symbols and conventions
  • ISO/IEC 8802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Specific requirements
    • ISO/IEC/IEEE 8802-A:2015 Part A: Overview and architecture
    • ISO/IEC TR 8802-1:2001 Part 1: Overview of Local Area Network Standards
    • ISO/IEC/IEEE 8802-1Q:2016 Part 1Q: Bridges and bridged networks
    • ISO/IEC/IEEE 8802-1X:2013 Part 1X: Port-based network access control
    • ISO/IEC/IEEE 8802-1AB:2017 Part 1AB: Station and media access control connectivity discovery
    • ISO/IEC/IEEE 8802-1AE:2013 Part 1AE: Media access control (MAC) security
    • ISO/IEC/IEEE 8802-1AR:2014 Part 1AR: Secure device identity
    • ISO/IEC/IEEE 8802-1AS:2014 Part 1AS: Timing and synchronization for time-sensitive applications in bridged local area networks
    • ISO/IEC/IEEE 8802-1AX:2016 Part 1AX: Link aggregation
    • ISO/IEC/IEEE 8802-1BA:2016 Part 1BA: Audio video bridging (AVB) systems
    • ISO/IEC/IEEE 8802-1BR:2016 Part 1BR: Virtual bridged local area networks – Bridge port extension
    • ISO/IEC 8802-2:1998 Part 2: Logical link control
    • ISO/IEC/IEEE 8802-3:2017 Part 3: Standard for Ethernet
    • ISO/IEC/IEEE 8802-3-1:2015 Part 3-1: Standard for management information base (MIB) – Definitions for Ethernet
    • ISO/IEC 8802-5:1998 Part 5: Token Ring access method and physical layer specifications
    • ISO/IEC/IEEE 8802-11:2012 Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
    • ISO/IEC/IEEE 8802-15-4:2010 Part 15-4: Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs)
    • ISO/IEC/IEEE 8802-22:2015 Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands
  • ISO 8805 Information processing systems – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) functional description
  • ISO/IEC 8806 Information technology – Computer graphics – Graphical Kernel System for Three Dimensions (GKS-3D) language bindings
    • ISO/IEC 8806-4 Part 4: C
  • ISO 8807:1989 Information processing systems – Open Systems Interconnection – LOTOS – A formal description technique based on the temporal ordering of observational behaviour
  • ISO 8811:2000 Earth-moving machinery – Rollers and compactors – Terminology and commercial specifications
  • ISO 8812:2016 Earth-moving machinery – Backhoe loaders – Terminology and commercial specifications
  • ISO 8815:1994 Aircraft – Electrical cables and cable harnesses – Vocabulary
  • ISO/IEC 8822:1994 Information technology – Open Systems Interconnection – Presentation service definition
  • ISO/IEC 8823 Information technology – Open Systems Interconnection – Connection-oriented presentation protocol
    • ISO/IEC 8823-1:1994 Protocol specification
    • ISO/IEC 8823-2:1997 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 8824 Information technology – Abstract Syntax Notation One (ASN.1)
    • ISO/IEC 8824-1:2015 Specification of basic notation
    • ISO/IEC 8824-2:2015 Information object specification
    • ISO/IEC 8824-3:2015 Constraint specification
    • ISO/IEC 8824-4:2015 Parameterization of ASN.1 specifications
  • ISO/IEC 8825 Information technology – ASN.1 encoding rules
  • ISO 8826 Technical drawings – Rolling bearings
    • ISO 8826-1:1989 Part 1: General simplified representation
    • ISO 8826-2:1994 Part 2: Detailed simplified representation
  • ISO 8827:1988 Implants for surgery – Staples with parallel legs for orthopaedic use – General requirements
  • ISO 8828:2014 Implants for surgery – Guidance on care and handling of orthopaedic implants
  • ISO 8835 Inhalational anaesthesia systems
    • ISO 8835-7:2011 Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases
  • ISO 8836:2014 Suction catheters for use in the respiratory tract
  • ISO 8843:2005 Aircraft – Crimp-removable contacts for electrical connectors – Identification system
  • ISO 8855:2011 Road vehicles – Vehicle dynamics and road-holding ability – Vocabulary
  • ISO/IEC 8859 Information technology – 8-bit single-byte coded graphic character sets
  • ISO 8860 Information processing – Data interchange on 90 mm (3.5 in) flexible disk cartridges using modified frequency modulation recording at 7 958 ftprad on 80 tracks on each side
    • ISO 8860-1:1987 Part 1: Dimensional, physical and magnetic characteristics
    • ISO 8860-2:1987 Part 2: Track format
  • ISO 8871 Elastomeric parts for parenterals and for devices for pharmaceutical use
    • ISO 8871-1:2003 Part 1: Extractables in aqueous autoclavates
    • ISO 8871-2:2003 Part 2: Identification and characterization
    • ISO 8871-3:2003 Part 3: Determination of released-particle count
    • ISO 8871-4:2006 Part 4: Biological requirements and test methods
    • ISO 8871-5:2016 Part 5: Functional requirements and testing
  • ISO 8872:2003 Aluminium caps for transfusion, infusion and injection bottles – General requirements and test methods
  • ISO/IEC 8877:1992 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN Basic Access Interface located at reference points S and T
  • ISO/IEC 8878:1992 Information technology – Telecommunications and information exchange between systems – Use of X.25 to provide the OSI Connection-mode Network Service
  • ISO 8879:1986 Information processing – Text and office systems – Standard Generalized Markup Language (SGML)
  • ISO/IEC 8880 Information technology — Telecommunications and information exchange between systems — Protocol combinations to provide and support the OSI Network Service
    • ISO/IEC 8880-1:1990 Part 1: General principles [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
    • ISO/IEC 8880-2:1992 Part 2: Provision and support of the connection-mode Network Service [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
    • ISO/IEC 8880-3:1990 Part 3: Provision and support of the connectionless-mode Network Service [Withdrawn: replaced by ISO/IEC TR 13532:1995, now withdrawn without replacement]
  • ISO/IEC 8881:1989 Information processing systems – Data communications – Use of the X.25 packet level protocol in local area networks
  • ISO/IEC 8882 Information technology – Telecommunications and information exchange between systems – X.25 DTE conformance testing
    • ISO/IEC 8882-1:1996 Part 1: General principles
    • ISO/IEC 8882-2:2000 Part 2: Data link layer conformance test suite
    • ISO/IEC 8882-3:2000 Part 3: Packet layer conformance test suite
  • ISO 8884:1989 Information processing — Text and office systems — Keyboards for multiple Latin-alphabet languages — Layout and operation [Withdrawn: replaced with ISO 9995-(1,7)]
  • ISO 8885:1987 Information processing systems — Data communication — High-level data link control procedures — General purpose XID frame information field content and format [Withdrawn without replacement]
  • ISO/IEC 8886:1996 Information technology – Open Systems Interconnection – Data link service definition
  • ISO 8887 Technical product documentation – Design for manufacturing, assembling, disassembling and end-of-life processing
    • ISO 8887-1:2017 Part 1: General concepts and requirements
  • ISO 8891:1998 Dental casting alloys with noble metal content of at least 25 % but less than 75 % [Withdrawn: replaced with ISO 22674]
  • ISO 8909 Forage harvesters
    • ISO 8909-1:1994 Part 1: Vocabulary
  • ISO 8910:1993 Machinery and equipment for working the soil – Mouldboard plough working elements – Vocabulary
  • ISO 8927:1991 Earth-moving machinery – Machine availability – Vocabulary
  • ISO 8930:1987 General principles on reliability for structures – List of equivalent terms
  • ISO 8936:2017 Awnings for leisure accommodation vehicles - Requirements and test methods
  • ISO 8954 Ferroalloys - Vocabulary
    • ISO 8954-1:1990 Part 1: Materials
    • ISO 8954-2:1990 Part 2: Sampling and sample preparation
    • ISO 8954-3:1990 Part 3: Sieve analysis
  • ISO 8957:1996 Information and documentation - Hebrew alphabet coded character sets for bibliographic information interchange
  • ISO 8965:2013 Logging industry – Technology – Terms and definitions
  • ISO 8979:2004 Pliers and nippers for electronics - Nomenclature
  • ISO 8980 Ophthalmic optics – Uncut finished spectacle lenses
    • ISO 8980-1:2017 Part 1: Specifications for single-vision and multifocal lenses
    • ISO 8980-2:2017 Part 2: Specifications for power-variation lenses
    • ISO 8980-3:2013 Part 3: Transmittance specifications and test methods
    • ISO 8980-4:2006 Part 4: Specifications and test methods for anti-reflective coatings
    • ISO 8980-5:2005 Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
  • ISO 8999:2001 Reciprocating internal combustion engines - Graphical symbols

ISO 9000 – ISO 9999[edit]

  • ISO 9000:2015 Quality management systems – Fundamentals and vocabulary
  • ISO 9001:2015 Quality management systems – Requirements
  • ISO/TS 9002:2016 Quality management systems – Guidelines for the application of ISO 9001:2015
  • ISO 9004:2018 Managing for the sustained success of an organization – A quality management approach
  • ISO/TR 9007:1987 Information processing systems - Concepts and terminology for the conceptual schema and the information base
  • ISO 9019:1995 Securities – Numbering of certificates
  • ISO 9022 Optics and optical instruments - Environmental test methods
    • ISO 9022-1:2016 Definitions, extent of testing
    • ISO 9022-2:2015 Cold, heat and humidity
    • ISO 9022-3:2015 Mechanical stress
    • ISO 9022-4:2014 Salt mist
    • ISO 9022-5:1994 Combined cold, low air pressure [Withdrawn: replaced by ISO 9022-23:2016]
    • ISO 9022-6:2015 Dust
    • ISO 9022-23:2016 Low pressure combined with cold, ambient temperature and dry or damp heat
  • ISO 9031:1987 Air cargo equipment - Handling systems for unit load devices (ULDs) - Symbols for pictorial representation
  • ISO 9036:1987 Information processing - Arabic 7-bit coded character set for information interchange
  • ISO/IEC 9040:1997 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Service
  • ISO/IEC 9041 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Protocol
    • ISO/IEC 9041-1:1997 Part 1: Specification
    • ISO/IEC 9041-2:1997 Part 2: Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9045:1990 Industrial screens and screening – Vocabulary
  • ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
  • ISO 9060: Solar energy -- Specification and classification of instruments for measuring hemispherical solar and direct solar radiation
  • ISO/IEC 9066 Information technology – Open Systems Interconnection – Reliable Transfer[Note 4]
    • ISO/IEC 9066-1:1989 Part 1: Model and service definition
    • ISO/IEC 9066-2:1989 Part 2: Protocol specification
    • ISO/IEC 9066-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9069:1988 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
  • ISO/IEC 9070:1991 Information technology - SGML support facilities - Registration procedures for public text owner identifiers
  • ISO/IEC 9072 Information technology – Open Systems Interconnection – Remote Operations[Note 4]
    • ISO/IEC 9072-1:1989 Part 1: Model, notation and service definition
    • ISO/IEC 9072-2:1989 Part 2: Protocol specification
    • ISO/IEC 9072-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 9075 Information technology – Database languages – SQL
  • ISO 9086 Wood – Methods of physical and mechanical testing – Vocabulary
    • ISO 9086-1:1987 Part 1: General concepts and macrostructure
  • ISO 9092:2011 Textiles – Nonwovens – Definition
  • ISO 9095:1990 Steel tubes – Continuous character marking and colour coding for material identification
  • ISO 9123:2001 Measurement of liquid flow in open channels – Stage-fall-discharge relationships
  • ISO/IEC 9126 Software engineering – Product quality
  • ISO 9128:2006 Road vehicles - Graphical symbols to designate brake fluid types
  • ISO 9141 Road vehicles – Diagnostic systems[Note 4]
    • ISO 9141-2 CARB requirements for interchange of digital information
    • ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
  • ISO 9144:1991 Securities – Optical character recognition line – Position and structure
  • ISO 9160:1988 Information processing - Data encipherment - Physical layer interoperability requirements
  • ISO 9170 Terminal units for medical gas pipeline systems
    • ISO 9170-1:2017 Part 1: Terminal units for use with compressed medical gases and vacuum
    • ISO 9170-2:2008 Part 2: Terminal units for anaesthetic gas scavenging systems
  • ISO/IEC 9171 Information technology - 130 mm optical disk cartridge, write once, for information interchange
    • ISO/IEC 9171-1:1990 Part 1: Unrecorded optical disk cartridge
    • ISO/IEC 9171-2:1990 Part 2: Recording format
  • ISO 9175 Tubular tips for hand-held technical pens using India ink on tracing paper
    • ISO 9175-1:1988 Part 1: Definitions, dimensions, designation and marking
  • ISO 9177 Mechanical pencils for technical drawings[Note 4]
    • ISO 9177-1:2016 Part 1: Classification, dimensions, performance requirements and testing
    • ISO 9177-2:1989 Part 2: Black leads – Classification and dimensions
    • ISO 9177-3:1994 Part 3: Black leads – Bending strengths of HB leads
  • ISO 9180:1988 Black leads for wood-cased pencils – Classification and diameters
  • ISO 9186 Graphical symbols - Test methods
    • ISO 9186-1:2014 Part 1: Method for testing comprehensibility
    • ISO 9186-2:2008 Part 2: Method for testing perceptual quality
    • ISO 9186-3:2014 Part 3: Method for testing symbol referent association
  • ISO 9187 Injection equipment for medical use
    • ISO 9187-1:2010 Part 1: Ampoules for injectables
    • ISO 9187-2:2010 Part 2: One-point-cut (OPC) ampoules
  • ISO 9195:1992 Liquid flow measurement in open channels – Sampling and analysis of gravel-bed material
  • ISO 9196:1992 Liquid flow measurement in open channels – Flow measurements under ice conditions
  • ISO 9211 Optics and photonics - Optical coatings
    • ISO 9211-1:2010 Part 1: Definitions
  • ISO/TR 9212:2015 Hydrometry – Methods of measurement of bedload discharge
  • ISO 9222 Technical drawings – Seals for dynamic application
    • ISO 9222-1:1989 Part 1: General simplified representation
    • ISO 9222-2:1989 Part 2: Detailed simplified representation
  • ISO 9223 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
  • ISO 9224 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
  • ISO 9225 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
  • ISO 9226 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • ISO 9227:2017 Corrosion tests in artificial atmospheres – Salt spray tests
  • ISO 9229:2007 Thermal insulation - Vocabulary
  • ISO 9230:2007 Information and documentation - Determination of price indexes for print and electronic media purchased by libraries
  • ISO 9232:2003 Yogurt – Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)
  • ISO 9235:2013 Aromatic natural raw materials – Vocabulary
  • ISO 9241 Ergonomics of human-system interaction
  • ISO 9244:2008 Earth-moving machinery - Machine safety labels - General principles
  • ISO 9245:1991 Earth-moving machinery – Machine productivity – Vocabulary, symbols and units
  • ISO 9247:1990 Earth-moving machinery – Electrical wires and cables – Principles of identification and marking
  • ISO/TS 9250 Earth-moving machinery – Multilingual listing of equivalent terms
    • ISO/TS 9250-1:2012 Part 1: General
    • ISO/TS 9250-2:2012 Part 2: Performance and dimensions
  • ISO 9251:1987 Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary
  • ISO 9264:1988 Woodworking machines – Narrow belt sanding machines with sliding table or frame – Nomenclature
  • ISO 9265:1988 Woodworking machines – Multi-spindle boring machines – Nomenclature
  • ISO 9266:1988 Woodworking machines – Universal tool and cutter sharpeners – Nomenclature
  • ISO 9267:1988 Woodworking machines – Bandsaw blade sharpening machines – Nomenclature
  • ISO 9268:1988 Implants for surgery – Metal bone screws with conical under-surface of head – Dimensions
  • ISO 9269:1988 Implants for surgery – Metal bone plates – Holes and slots corresponding to screws with conical under-surface
  • ISO/IEC 9281 Information technology - Picture coding methods
    • ISO/IEC 9281-1:1990 Part 1: Identification
    • ISO/IEC 9281-2:1990 Part 2: Procedure for registration
  • ISO/IEC 9282 Information processing - Coded representation of pictures
    • ISO/IEC 9282-1:1988 Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment
  • ISO 9288:1989 Thermal insulation – Heat transfer by radiation – Physical quantities and definitions
  • ISO/IEC 9293:1994 Information technology – Volume and file structure of disk cartridges for information interchange
  • ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
  • ISO 9296:2017 Acoustics - Declared noise emission values of information technology and telecommunications equipment
  • ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • ISO 9308 Water quality – Enumeration of Escherichia coli and coliform bacteria[Note 4]
    • ISO 9308-1:2014 Part 1: Membrane filtration method for waters with low bacterial background flora
    • ISO 9308-2:2012 Part 2: Most probable number method
    • ISO 9308-3:1998 Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water
  • ISO 9314 Information processing systems Fibre Distributed Data Interface (FDDI)
    • ISO 9314-1:1989 Part 1: Token Ring Physical Layer Protocol (PHY)
    • ISO 9314-2:1989 Part 2: Token Ring Media Access Control (MAC)
    • ISO/IEC 9314-3:1990 Part 3: Physical Layer Medium Dependent (PMD)
    • ISO/IEC 9314-4:1999 Part 4: Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)
    • ISO/IEC 9314-5:1995 Part 5: Hybrid Ring Control (HRC)
    • ISO/IEC 9314-6:1998 Part 6: Station Management (SMT)
    • ISO/IEC 9314-7:1998 Part 7: Physical layer Protocol (PHY-2)
    • ISO/IEC 9314-8:1998 Part 8: Media Access Control-2 (MAC-2)
    • ISO/IEC 9314-9:2000 Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD)
    • ISO/IEC 9314-13:1998 Part 13: Conformance Test Protocol Implementation Conformance Statement (CT-PICS) Proforma
    • ISO/IEC 9314-20:2001 Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)
    • ISO/IEC 9314-21:2000 Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)
    • ISO/IEC 9314-25:1998 Part 25: Abstract test suite for FDDI - Station Management Conformance Testing (SMT-ATS)
    • ISO/IEC 9314-26:2001 Part 26: Media Access Control Conformance Testing (MAC-ATS)
  • ISO 9315:1989 Information processing systems - Interface between flexible disk cartridge drives and their host controllers
  • ISO/IEC 9316:1995 Information technology - Small Computer System Interface-2
    • ISO/IEC 9316-2:2000 Information technology - Small computer system interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI interface module
  • ISO/IEC 9318 Information technology - Intelligent Peripheral Interface
    • ISO/IEC 9318-2:1990 Part 2: Device specific command set for magnetic disk drives
    • ISO/IEC 9318-3:1990 Part 3: Device generic command set for magnetic and optical disk drives
    • ISO/IEC 9318-4:2002 Part 4: Device generic command set for magnetic tape drives (IPI-3 tape)
  • ISO 9334:2012 Optics and photonics - Optical transfer function - Definitions and mathematical relationships
  • ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
  • ISO 9342 Optics and optical instruments – Test lenses for calibration of focimeters
    • ISO 9342-1:2005 Part 1: Test lenses for focimeters used for measuring spectacle lenses
    • ISO 9342-2:2005 Part 2: Test lenses for focimeters used for measuring contact lenses
  • ISO 9346:2007 Hygrothermal performance of buildings and building materials – Physical quantities for mass transfer – Vocabulary
  • ISO 9360 Anaesthetic and respiratory equipment – Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
    • ISO 9360-1:2000 Part 1: HMEs for use with minimum tidal volumes of 250 ml
    • ISO 9360-2:2001 Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
  • ISO 9362:2014 Banking – Banking telecommunication messages – Business identifier code (BIC)
  • ISO 9368 Measurement of liquid flow in closed conduits by the weighing method – Procedures for checking installations
    • ISO 9368-1:1990 Part 1: Static weighing systems
  • ISO 9394:2012 Ophthalmic optics – Contact lenses and contact lens care products – Determination of biocompatibility by ocular study with rabbit eyes
  • ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
  • ISO 9431:1990 Construction drawings – Spaces for drawing and for text, and title blocks on drawing sheets
  • ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
  • ISO 9488:1999 Solar energy - Vocabulary
  • ISO 9493:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Dial test indicators (lever type) – Design and metrological characteristics
  • ISO/IEC 9496:2003 CHILL - The ITU-T programming language
  • ISO 9506 Industrial automation systems - Manufacturing Message Specification
  • ISO/IEC 9529 Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
  • ISO/IEC 9541 Information technology – Font information interchange
    • ISO/IEC 9541-1:2012 Part 1: Architecture
    • ISO/IEC 9541-2:2012 Part 2: Interchange Format
    • ISO/IEC 9541-3:2012 Part 3: Glyph shape representation
    • ISO/IEC 9541-4:2009 Part 4: Harmonization to Open Font Format
  • ISO 9542:1988 Information processing systems – Telecommunications and information exchange between systems – End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473)
  • ISO 9543:1989 Information processing systems – Information exchange between systems – Synchronous transmission signal quality at DTE/DCE interfaces
  • ISO/IEC 9545:1994 Information technology – Open Systems Interconnection – Application Layer structure
  • ISO/TR 9547:1988 Programming language processors - Test methods - Guidelines for their development and acceptability
  • ISO/IEC 9548 Information technology – Open Systems Interconnection – Connectionless Session protocol
    • ISO/IEC 9548-1:1996 Protocol specification
    • ISO/IEC 9548-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 9549:1990 Information technology – Galvanic isolation of balanced interchange circuit
  • ISO 9555 Measurement of liquid flow in open channels – Tracer dilution methods for the measurement of steady flow
    • ISO 9555-1:1994 Part 1: General
    • ISO 9555-3:1992 Part 3: Chemical tracers
    • ISO 9555-4:1992 Part 4: Fluorescent tracers
  • ISO 9564 Financial services – Personal Identification Number (PIN) management and security
  • ISO 9568:1993 Cinematography – Background acoustic noise levels in theatres, review rooms and dubbing rooms
  • ISO/IEC TR 9573:1988 Information processing - SGML support facilities - Techniques for using SGML
    • ISO/IEC TR 9573-11:2004 Part 11: Structure descriptions and style specifications for standards document interchange
    • ISO/IEC TR 9573-13:1991 Part 13: Public entity sets for mathematics and science
  • ISO/IEC 9574:1992 Information technology – Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
  • ISO/IEC TR 9575:1995 Information technology – Telecommunications and information exchange between systems – OSI Routeing Framework
  • ISO/IEC 9576 Information technology – Open Systems Interconnection – Connectionless Presentation protocol
    • ISO/IEC 9576-1:1995 Protocol specification
    • ISO/IEC 9576-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC TR 9577:1999 Information technology – Protocol identification in the network layer
  • ISO/IEC TR 9578:1990 Information technology – Communication interface connectors used in local area networks
  • ISO/IEC 9579:2000 Information technology – Remote database access for SQL with security enhancement
  • ISO 9583:1993 Implants for surgery – Non-destructive testing – Liquid penetrant inspection of metallic surgical implants
  • ISO 9584:1993 Implants for surgery – Non-destructive testing – Radiographic examination of cast metallic surgical implants
  • ISO 9585:1990 Implants for surgery – Determination of bending strength and stiffness of bone plates
  • ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
  • ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 4]
  • ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
    • ISO/IEC 9594-1:2017 Part 1: Overview of concepts, models and services
    • ISO/IEC 9594-2:2017 Part 2: Models
    • ISO/IEC 9594-3:2017 Part 3: Abstract service definition
    • ISO/IEC 9594-4:2017 Part 4: Procedures for distributed operation
    • ISO/IEC 9594-5:2017 Part 5: Protocol specifications
    • ISO/IEC 9594-6:2017 Part 6: Selected attribute types
    • ISO/IEC 9594-7:2017 Part 7: Selected object classes
    • ISO/IEC 9594-8:2017 Part 8: Public-key and attribute certificate frameworks
    • ISO/IEC 9594-9:2017 Part 9: Replication
  • ISO/IEC 9595:1998 Information technology – Open Systems Interconnection – Common management information service
  • ISO/IEC 9596 Information technology – Open Systems Interconnection – Common management information protocol
    • ISO/IEC 9596-1:1998 Part 1: Specification
    • ISO/IEC 9596-2:1993 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9611:1996 Acoustics – Characterization of sources of structure-borne sound with respect to sound radiation from connected structures – Measurement of velocity at the contact points of machinery when resiliently mounted
  • ISO 9613 Acoustics – Attenuation of sound during propagation outdoors
    • ISO 9613-1:1993 Part 1: Calculation of the absorption of sound by the atmosphere
    • ISO 9613-2:1996 Part 2: General method of calculation
  • ISO 9614 Acoustics – Determination of sound power levels of noise sources using sound intensity
    • ISO 9614-1:1993 Part 1: Measurement at discrete points
    • ISO 9614-2:1996 Part 2: Measurement by scanning
    • ISO 9614-3:2002 Part 3: Precision method for measurement by scanning
  • ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices – Requirements and test methods
  • ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
    • ISO/IEC 9636-1:1991 Part 1: Overview, profiles, and conformance
    • ISO/IEC 9636-2:1991 Part 2: Control
    • ISO/IEC 9636-3:1991 Part 3: Output
    • ISO/IEC 9636-4:1991 Part 4: Segments
    • ISO/IEC 9636-5:1991 Part 5: Input and echoing
    • ISO/IEC 9636-6:1991 Part 6: Raster
  • ISO/IEC 9637 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) – Data stream binding
    • ISO/IEC 9637-1:1994 Part 1: Character encoding
    • ISO/IEC 9637-2:1992 Part 2: Binary encoding
  • ISO/IEC 9638 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Language bindings
    • ISO/IEC 9638-3:1994 Part 3: Ada
  • ISO 9645:1990 Acoustics – Measurement of noise emitted by two-wheeled mopeds in motion – Engineering method
  • ISO/IEC 9646 Information technology—Open Systems Interconnection—Conformance testing methodology and framework
    • ISO/IEC 9646-1:1994 Part 1: General concepts
    • ISO/IEC 9646-2:1994 Part 2: Abstract Test Suite specification
    • ISO/IEC 9646-3:1998 Part 3: The Tree and Tabular Combined Notation (TTCN)
    • ISO/IEC 9646-4:1994 Part 4: Test realization
    • ISO/IEC 9646-5:1994 Part 5: Requirements on test laboratories and clients for the conformance assessment process
    • ISO/IEC 9646-6:1994 Part 6: Protocol profile test specification
    • ISO/IEC 9646-7:1995 Part 7: Implementation Conformance Statements
  • ISO 9660:1988 Information processing – Volume and file structure of CD-ROM for information interchange
  • ISO/IEC 9661:1994 Information technology – Data interchange on 12,7 mm wide magnetic tape cartridges – 18 tracks, 1 491 data bytes per millimetre
  • ISO 9662:1994 Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests
  • ISO 9668:1990 Pulps — Determination of magnesium content — Flame atomic absorption spectrometric method [Withdrawn: replaced with ISO 12830]
  • ISO 9687:2015 Dentistry - Graphical symbols for dental equipment
  • ISO 9688:1990 Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses
  • ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
  • ISO 9706:1994 Information and documentation – Paper for documents – Requirements for permanence
  • ISO 9707:2008 Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
  • ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel
  • ISO 9713:2002 Neurosurgical implants – Self-closing intracranial aneurysm clips
  • ISO 9714 Orthopaedic drilling instruments
    • ISO 9714-1:2012 Part 1: Drill bits, taps and countersink cutters
  • ISO 9735:1988 Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4, Syntax release number: 2)[Note 4]
    • ISO 9735-1:2002 Part 1: Syntax rules common to all parts
    • ISO 9735-2:2002 Part 2: Syntax rules specific to batch EDI
    • ISO 9735-3:2002 Part 3: Syntax rules specific to interactive EDI
    • ISO 9735-4:2002 Part 4: Syntax and service report message for batch EDI (message type – CONTRL)
    • ISO 9735-5:2002 Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
    • ISO 9735-6:2002 Part 6: Secure authentication and acknowledgement message (message type – AUTACK)
    • ISO 9735-7:2002 Part 7: Security rules for batch EDI (confidentiality)
    • ISO 9735-8:2002 Part 8: Associated data in EDI
    • ISO 9735-9:2002 Part 9: Security key and certificate management message (message type – KEYMAN)
    • ISO 9735-10:2014 Part 10: Syntax service directories
  • ISO/IEC 9796 Information technology – Security techniques – Digital signature schemes giving message recovery
    • ISO/IEC 9796-2:2010 Part 2: Integer factorization based mechanisms
    • ISO/IEC 9796-3:2006 Part 3: Discrete logarithm based mechanisms
  • ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
    • ISO/IEC 9797-1:2011 Part 1: Mechanisms using a block cipher
    • ISO/IEC 9797-2:2011 Part 2: Mechanisms using a dedicated hash-function
    • ISO/IEC 9797-3:2011 Part 3: Mechanisms using a universal hash-function
  • ISO/IEC 9798 Information technology – Security techniques – Entity authentication
    • ISO/IEC 9798-1:2010 Part 1: General
    • ISO/IEC 9798-2:2008 Part 2: Mechanisms using symmetric encipherment algorithms
    • ISO/IEC 9798-3:1998 Part 3: Mechanisms using digital signature
    • ISO/IEC 9798-4:1999 Part 4: Mechanisms using a cryptographic check function
    • ISO/IEC 9798-5:2009 Part 5: Mechanisms using zero-knowledge techniques
    • ISO/IEC 9798-6:2010 Part 6: Mechanisms using manual data transfer
  • ISO 9801:2009 Ophthalmic instruments – Trial case lenses
  • ISO 9802:1996 Raw optical glass – Vocabulary
  • ISO/IEC 9804:1998 Information technology – Open Systems Interconnection – Service definition for the Commitment, Concurrency and Recovery service element
  • ISO/IEC 9805 Information technology – Open Systems Interconnection – Protocol for the Commitment, Concurrency and Recovery service element
    • ISO/IEC 9805-1:1998 Protocol specification
    • ISO/IEC 9805-2:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/TR 9824:2007 Hydrometry – Measurement of free surface flow in closed conduits
  • ISO 9825:2005 Hydrometry – Field measurement of discharge in large rivers and rivers in flood
  • ISO 9826:1992 Measurement of liquid flow in open channels – Parshall and SANIIRI flumes
  • ISO 9827:1994 Measurement of liquid flow in open channels by weirs and flumes – Streamlined triangular profile weirs
  • ISO/IEC 9834 Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
    • ISO/IEC 9834-1:2012 General procedures and top arcs of the international object identifier tree
    • ISO/IEC 9834-2:1993 Part 2: Registration procedures for OSI document types
    • ISO/IEC 9834-3:2008 Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
    • ISO/IEC 9834-4:1991 Part 4: Register of VTE Profiles
    • ISO/IEC 9834-5:1991 Part 5: Register of VT Control Object Definitions
    • ISO/IEC 9834-6:2005 Registration of application processes and application entities
    • ISO/IEC 9834-7:2008 Joint ISO and ITU-T Registration of International Organizations
    • ISO/IEC 9834-8:2014 Part 8: Generation of universally unique identifiers (UUIDs) and their use in object identifiers
    • ISO/IEC 9834-9:2008 Registration of object identifier arcs for applications and services using tag-based identification
  • ISO 9846 Solar energy -- Calibration of a pyranometer using a pyrheliometer
  • ISO 9847 Solar energy -- Calibration of field pyranometers by comparison to a reference pyranometer
  • ISO 9849:2017 Optics and optical instruments - Geodetic and surveying instruments - Vocabulary
  • ISO 9851:1990 Continuous mechanical handling equipment – Overhead electrical monorail conveyors – Definitions and safety rules
  • ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
  • ISO 9873:2017 Dentistry - Intra-oral mirrors
  • ISO 9878:1990 Micrographics - Graphical symbols for use in microfilming
  • ISO 9897:1997 Freight containers - Container equipment data exchange (CEDEX) - General communication codes
  • ISO/IEC 9899:2018 Programming languages – C
  • ISO 9902 Textile machinery – Noise test code
    • ISO 9902-1:2001 Part 1: Common requirements
    • ISO 9902-2:2001 Part 2: Spinning preparatory and spinning machinery
    • ISO 9902-3:2001 Part 3: Nonwoven machinery
    • ISO 9902-4:2001 Part 4: Yarn processing, cordage and rope manufacturing machinery
    • ISO 9902-5:2001 Part 5: Weaving and knitting preparatory machinery
    • ISO 9902-6:2001 Part 6: Fabric manufacturing machinery
    • ISO 9902-7:2001 Part 7: Dyeing and finishing machinery
  • ISO 9926 Cranes – Training of operators[Note 4]
    • ISO 9926-1:1990 Part 1: General
    • ISO 9926-3:2016 Part 3: Tower cranes
  • ISO/IEC/IEEE 9945:2009 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
  • ISO 9947:2005 Textile machinery and accessories – Two-for-one twisters – Vocabulary
  • ISO 9949 Urine absorbing aids - Vocabulary
    • ISO 9949-1:1993 Part 1: Conditions of urinary incontinence
    • ISO 9949-2:1993 Part 2: Products
    • ISO 9949-3:1993 Part 3: Identification of product types
  • ISO 9951:1993 Measurement of gas flow in closed conduits – Turbine meters
  • ISO 9957 Fluid draughting media
    • ISO 9957-1:1992 Part 1: Water-based India ink – Requirements and test conditions
    • ISO 9957-2:1995 Part 2: Water-based non-India ink – Requirements and test conditions
    • ISO 9957-3:1997 Part 3: Water-based coloured draughting inks – Requirements and test conditions
  • ISO 9958 Draughting media for technical drawings – Draughting film with polyester base
    • ISO 9958-1:1992 Part 1: Requirements and marking
    • ISO 9958-2:1992 Part 2: Determination of properties
  • ISO 9959 Numerically controlled draughting machines – Drawing test for the evaluation of performance
    • ISO 9959-1:1992 Part 1: Vector plotters
  • ISO 9960 Draughting instruments with or without graduation
    • ISO 9960-1:1992 Part 1: Draughting scale rules
  • ISO 9961:1992 Draughting media for technical drawings – Natural tracing paper
  • ISO 9962 Manually operated draughting machines
    • ISO 9962-1:1992 Part 1: Definitions, classification and designation
    • ISO 9962-2:1992 Part 2: Characteristics, performance, inspection and marking
  • ISO/IEC 9973:2013 Information technology - Computer graphics, image processing and environmental data representation - Procedures for registration of items
  • ISO 9984:1996 Information and documentation – Transliteration of Georgian characters into Latin characters
  • ISO 9985:1996 Information and documentation – Transliteration of Armenian characters into Latin characters
  • ISO 9992 Financial transaction cards – Messages between the integrated circuit card and the card accepting device
  • ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
  • ISO 9997:1999 Dental cartridge syringes
  • ISO 9999 Assistive products for persons with disability – Classification and terminology

Notes[edit]

  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
  3. ^ a b c The exact wording of this title varies between parts. This is the wording of the most recently published part.
  4. ^ a b c d e f g h The exact wording of this title varies between parts. This is the wording of the most recently published part.

References[edit]

  1. ^ "Standards catalogue". ISO.
  2. ^ "Freely Available Standards". ISO.

External links[edit]

source: https://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards,_9000-9999

Leave a Reply