This is a list of published^{[Note 1]} International Organization for Standardization (ISO) standards and other deliverables.^{[Note 2]} For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.^[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.^[2]

ISO 12000 – ISO 12999[edit]

• ISO 12001:1996 Acoustics – Noise emitted by machinery and equipment – Rules for the drafting and presentation of a noise test code
• ISO 12005:2003 Lasers and laser-related equipment – Test methods for laser beam parameters – Polarization
• ISO 12006 Building construction – Organization of information about construction works
• ISO 12013:2012 Paints and varnishes — Determination of curing characteristics using a free damped oscillation method —
• ISO/TS 12025:2012 Nano materials – Quantification of nano-object release from powders by generation of aerosols
• ISO/IEC 12042:1993 Information technology – Data compression for information interchange – Binary arithmetic coding algorithm
• ISO 12052:2017 Health informatics – Digital imaging and communication in medicine (DICOM) including workflow and data management
• ISO 12083:1994 Information and documentation - Electronic manuscript preparation and markup
• ISO 12085:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters
• ISO/IEC 12087 Information technology - Computer graphics and image processing - Image Processing and Interchange (IPI) - Functional specification
  • ISO/IEC 12087-1:1995 Part 1: Common architecture for imaging
  • ISO/IEC 12087-2:1994 Part 2: Programmer's imaging kernel system application programme interface
  • ISO/IEC 12087-3:1995 Part 3: Image Interchange Facility (IIF)
  • ISO/IEC 12087-5:1998 Part 5: Basic Image Interchange Format (BIIF)
• ISO/IEC 12088-4:1995 Information technology - Computer graphics and image processing - Image processing and interchange - Application program interface language bindings
• ISO/IEC 12089:1997 Information technology - Computer graphics and image processing - Encoding for the Image Interchange Facility (IIF)
• ISO 12100 Safety of machinery – General principles for design – Risk assessment and risk reduction
• ISO/IEC 12139 Information technology – Telecommunications and information exchange between systems – Powerline communication (PLC) – High speed PLC medium access control (MAC) and physical layer (PHY)
• ISO/IEC 12097:2002 Road vehicles -- Airbag components
  • ISO/IEC 12139-1:2009 Part 1: General requirements
• ISO 12163:1999 Dental baseplate/modelling wax [Withdrawn: replaced with ISO 15854]
• ISO 12164 Hollow taper interface with flange contact surface
  • ISO 12164-1:2001 Part 1: Shanks — Dimensions
  • ISO 12164-2:2001 Part 2: Receivers — Dimensions
  • ISO 12164-3:2014 Part 3: Dimensions of shanks for stationary tools
  • ISO 12164-4:2014 Part 4: Dimensions of receivers for stationary tools
• ISO 12165:2000 Tools for moulding - Components of compression and injection moulds and diecasting dies - Terms and symbols
• ISO 12176 Plastics pipes and fittings – Equipment for fusion jointing polyethylene systems
  • ISO 12176-3:2011 Part 3: Operator's badge
• ISO 12179:2000 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Calibration of contact (stylus) instruments
• ISO 12180 Geometrical product specifications (GPS) - Cylindricity
  • ISO 12180-1:2011 Part 1: Vocabulary and parameters of cylindrical form
  • ISO 12180-2:2011 Part 2: Specification operators
• ISO 12181 Geometrical product specifications (GPS) - Roundness
  • ISO 12181-1:2011 Part 1: Vocabulary and parameters of roundness
  • ISO 12181-2:2011 Part 2: Specification operators
• ISO/IEC TR 12182:2015 Systems and software engineering - Framework for categorization of IT systems and software, and guide for applying it
• ISO 12188 Tractors and machinery for agriculture and forestry – Test procedures for positioning and guidance systems in agriculture
  • ISO 12188-1:2010 Part 1: Dynamic testing of satellite-based positioning devices
  • ISO 12188-2:2012 Part 2: Testing of satellite-based auto-guidance systems during straight and level travel
• ISO 12189:2008 Implants for surgery – Mechanical testing of implantable spinal devices – Fatigue test method for spinal implant assemblies using an anterior support
• ISO 12199:2000 Alphabetical ordering of multilingual terminological and lexicographical data represented in the Latin alphabet
• ISO/IEC 12207 Systems and software engineering – Software life cycle processes
• ISO 12231:2012 Photography - Electronic still picture imaging - Vocabulary
• ISO 12242:2012 Measurement of fluid flow in closed conduits – Ultrasonic transit-time meters for liquid
• ISO/IEC 12246:1993 Information technology – 8 mm wide magnetic tape cartridge dual azimuth format for information interchange – Helical scan recording
• ISO/IEC 12247:1993 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS format using 60 m and 90 m length tapes
• ISO/IEC 12248:1993 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DATA/DAT-DC format using 60 m and 90 m length tapes
• ISO/TR 12300:2014 Health informatics – Principles of mapping between terminological systems
• ISO/TR 12309:2009 Health informatics – Guidelines for terminology development organizations
• ISO/TR 12310:2015 Health informatics – Principles and guidelines for the measurement of conformance in the implementation of terminological systems
• ISO 12353 Road vehicles – Traffic accident analysis
  • ISO 12353-1:2002 Part 1: Vocabulary
• ISO/IEC TR 12382:1992 Permuted index of the vocabulary of information technology
• ISO 12417 Cardiovascular implants and extracorporeal systems – Vascular device-drug combination products
  • ISO 12417-1:2015 Part 1: General requirements
• ISO 12543 Glass in building – Laminated glass and laminated safety glass
  • ISO 12543-1:2011 Part 1: Definitions and description of component parts
• ISO 12615:2004 Bibliographic references and source identifiers for terminology work
• ISO 12616:2002 Translation-oriented terminography
• ISO 12620:2019 Management of terminology resources — Data category specifications
• ISO 12625 Tissue paper and tissue products
  • ISO 12625-1:2011 Part 1: General guidance on terms
• ISO 12637 Graphic technology - Vocabulary
  • ISO 12637-1:2006 Part 1: Fundamental terms
  • ISO 12637-2:2008 Part 2: Prepress terms
  • ISO 12637-3:2009 Part 3: Printing terms
  • ISO 12637-4:2008 Part 4: Postpress terms
• ISO 12639:2004 Graphic technology – Prepress digital data exchange – Tag image file format for image technology (TIFF/IT)
• ISO 12640 Graphic technology - Prepress digital data exchange
  • ISO 12640-1:1997 Part 1: CMYK standard colour image data (CMYK/SCID)
  • ISO 12640-2:2004 Part 2: XYZ/sRGB encoded standard colour image data (XYZ/SCID)
  • ISO 12640-3:2007 Part 3: CIELAB standard colour image data (CIELAB/SCID)
  • ISO 12640-4:2011 Part 4: Wide gamut display-referred standard colour image data [Adobe RGB (1998)/SCID]
  • ISO 12640-5:2013 Part 5: Scene-referred standard colour image data (RIMM/SCID)
• ISO 12641:1997 Graphic technology – Prepress digital data exchange – Colour targets for input scanner calibration
  • ISO 12641-1:2016 Part 1: Colour targets for input scanner calibration
• ISO 12642 Graphic technology - Input data for characterization of four-colour process printing
  • ISO 12642-1:2011 Part 1: Initial data set
  • ISO 12642-2:2006 Part 2: Expanded data set
• ISO 12651 Electronic document management - Vocabulary
  • ISO 12651-1:2012 Part 1: Electronic document imaging
  • ISO 12651-2:2014 Part 2: Workflow management
• ISO 12671:2012 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings
• ISO 12706:2009 Non-destructive testing - Penetrant testing - Vocabulary
• ISO 12707:2016 Non-destructive testing - Magnetic particle testing - Vocabulary
• ISO 12716:2001 Non-destructive testing - Acoustic emission inspection - Vocabulary
• ISO 12718:2008 Non-destructive testing - Eddy current testing - Vocabulary
• ISO 12749 Nuclear energy, nuclear technologies, and radiological protection - Vocabulary
  • ISO 12749-2:2013 Part 2: Radiological protection
  • ISO 12749-3:2015 Part 3: Nuclear fuel cycle
  • ISO 12749-4:2015 Part 4: Dosimetry for radiation processing
• ISO 12756:2016 Drawing and writing instruments - Ball point pens and roller ball pens - Vocabulary
• ISO 12757 Ball point pens and refills
  • ISO 12757-2:1998 Part 2: Documentary use (DOC)
• ISO 12764:2017 Measurement of fluid flow in closed conduits – Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
• ISO/TR 12767:2007 Measurement of fluid flow by means of pressure differential devices – Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167
• ISO/TR 12773 Business requirements for health summary records
  • ISO/TR 12773-1:2009 Part 1: Requirements
  • ISO/TR 12773-2:2009 Part 2: Environmental scan
• ISO 12780 Geometrical product specifications (GPS) - Straightness
  • ISO 12780-1:2011 Part 1: Vocabulary and parameters of straightness
  • ISO 12780-2:2011 Part 2: Specification operators
• ISO 12781 Geometrical product specifications (GPS) - Flatness
  • ISO 12781-1:2011 Part 1: Vocabulary and parameters of flatness
  • ISO 12781-2:2011 Part 2: Specification operators
• ISO/IEC 12785 Information technology - Learning, education, and training - Content packaging
  • ISO/IEC 12785-1:2009 Part 1: Information model
  • ISO/IEC 12785-2:2011 Part 2: XML binding
  • ISO/IEC TR 12785-3:2012 Part 3: Best practice and implementation guide
• ISO 12789 Reference radiation fields - Simulated workplace neutron fields
  • ISO 12789-1:2008 Part 1: Characteristics and methods of production
  • ISO 12789-2:2008 Part 2: Calibration fundamentals related to the basic quantities
• ISO/TR 12802:2010 Nanotechnologies - Model taxonomic framework for use in developing vocabularies - Core concepts
• ISO/TS 12805:2011 Nanotechnologies – Materials specifications – Guidance on specifying nano-objects
• ISO 12812 Core banking – Mobile financial services
  • ISO 12812-1:2017 Part 1: General framework
  • ISO/TS 12812-2:2017 Part 2: Security and data protection for mobile financial services
  • ISO/TS 12812-3:2017 Part 3: Financial application lifecycle management
  • ISO/TS 12812-4:2017 Part 4: Mobile payments-to-persons
  • ISO/TS 12812-5:2017 Part 5: Mobile payments to businesses
• ISO 12813:2015 Electronic fee collection – Compliance check communication for autonomous systems
• ISO 12836:2015 Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy
• ISO/TR 12845:2010 Selected illustrations of fractional factorial screening experiments
• ISO 12855:2015 Electronic fee collection – Information exchange between service provision and toll charging
• ISO 12858 Optics and optical instruments – Ancillary devices for geodetic instruments
  • ISO 12858-1:2014 Part 1: Invar levelling staffs
  • ISO 12858-2:1999 Part 2: Tripods
  • ISO 12858-3:2005 Part 3: Tribrachs
• ISO/TR 12859:2009 Intelligent transport systems – System architecture – Privacy aspects in ITS standards and systems
• ISO/IEC TR 12860:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – General
• ISO/IEC TR 12861:2009 Information technology – Telecommunications and information exchange between systems – Next Generation Corporate Networks (NGCN) – Identification and routing
• ISO/IEC 12862:2011 Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD recordable disk for dual layer (DVD-R for DL)
• ISO 12865:2006 Ophthalmic instruments – Retinoscopes
• ISO 12866:1999 Ophthalmic instruments – Perimeters
• ISO 12867:2010 Ophthalmic instruments – Trial frames
• ISO/TS 12869:2012 Water quality – Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qPCR)
• ISO 12870:2016 Ophthalmic optics – Spectacle frames – Requirements and test methods
• ISO/TR 12885:2008 Nanotechnologies – Health and safety practices in occupational settings relevant to nanotechnologies
• ISO/TR 12888:2011 Selected illustrations of gauge repeatability and reproducibility studies
• ISO 12891 Retrieval and analysis of surgical implants
  • ISO 12891-1:2015 Part 1: Retrieval and handling
  • ISO 12891-2:2014 Part 2: Analysis of retrieved surgical implants
• ISO/TS 12901 Nanotechnologies – Occupational risk management applied to engineered nanomaterials
  • ISO/TS 12901-1:2012 Part 1: Principles and approaches
  • ISO/TS 12901-2:2014 Part 2: Use of the control banding approach
• ISO/IEC 12905:2011 Integrated circuit cards – Enhanced terminal accessibility using cardholder preference interface
• ISO 12912:2014 Circular knitting machines – Vocabulary
• ISO 12913 Acoustics – Soundscape
  • ISO 12913-1:2014 Part 1: Definition and conceptual framework
• ISO 12931:2012 Performance criteria for authentication solutions used to combat counterfeiting of material goods
• ISO 12944 Paints and varnishes – Corrosion protection of steel structures by protective paint systems
• ISO 12967 Health informatics – Service architecture
  • ISO 12967-1:2009 Part 1: Enterprise viewpoint
  • ISO 12967-2:2009 Part 2: Information viewpoint
  • ISO 12967-3:2009 Part 3: Computational viewpoint
• ISO 12999 Acoustics – Determination and application of measurement uncertainties in building acoustics
  • ISO 12999-1:2014 Part 1: Sound insulation

ISO 13000 – ISO 13999[edit]

• ISO 13006:2012 Ceramic tiles – Definitions, classification, characteristics and marking
• ISO 13007 Ceramic tiles – Grouts and adhesives
  • ISO 13007-1:2014 Terms, definitions and specifications for adhesives
  • ISO 13007-2:2010 Test methods for adhesives
  • ISO 13007-3:2010 Terms, definitions and specifications for grouts
  • ISO 13007-4:2013 Test methods for grouts
• ISO 13008:2012 Information and documentation - Digital records conversion and migration process
• ISO 13009:2015 Tourism and related services – Requirements and recommendations for beach operation
• ISO/TR 13014:2012 Nanotechnologies – Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
• ISO/TR 13028:2010 Information and documentation - Implementation guidelines for digitization of records
• ISO 13053 Quantitative methods in process improvement - Lean and Six Sigma
  • ISO 13053-1:2011 Part 1: DMAIC methodology
  • ISO 13053-2:2011 Part 2: Tools and techniques
• ISO/TR 13054:2012 Knowledge management of health information standards
• ISO/TR 13062:2015 Electric mopeds and motorcycles – Terminology and classification
• ISO/IEC 13066 Information technology - Interoperability with assistive technology (AT)
  • ISO/IEC 13066-1:2011 Part 1: Requirements and recommendations for interoperability
  • ISO/IEC TR 13066-2:2016 Part 2: Windows accessibility application programming interface (API)
  • ISO/IEC TR 13066-3:2012 Part 3: IAccessible2 accessibility application programming interface (API)
  • ISO/IEC TR 13066-4:2015 Part 4: Linux/UNIX graphical environments accessibility API
  • ISO/IEC TR 13066-6:2014 Part 6: Java accessibility application programming interface (API)
• ISO 13078 Dentistry - Dental furnace
  • ISO 13078-2:2016 Part 2: Test method for evaluation of furnace programme via firing glaze
• ISO 13102:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment: Electronic digital-indicator gauge – Design and metrological characteristics
• ISO 13105 Building construction machinery and equipment – Machinery for concrete surface floating and finishing
  • ISO 13105-1:2014 Part 1: Terms and commercial specifications
• ISO 13111 Intelligent transport systems (ITS) – The use of personal ITS station to support ITS service provision for travellers
  • ISO 13111-1:2017 Part 1: General information and use case definitions
• ISO 13119:2012 Health informatics – Clinical knowledge resources – Metadata
• ISO 13120:2013 Health informatics – Syntax to represent the content of healthcare classification systems – Classification Markup Language (ClaML)
• ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation
• ISO 13127:2012 Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems
• ISO/TR 13128:2012 Health Informatics – Clinical document registry federation
• ISO/TS 13131:2014 Health informatics – Telehealth services – Quality planning guidelines
• ISO/TS 13136:2012 Microbiology of food and animal feed – Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens – Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups
• ISO 13140 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 13141
  • ISO 13140-1:2016 Part 1: Test suite structure and test purposes
  • ISO 13140-2:2016 Part 2: Abstract test suite
• ISO 13141:2015 Electronic fee collection – Localisation augmentation communication for autonomous systems
• ISO 13142:2015 Electro-optical systems – Cavity ring-down technique for high-reflectance measurement
• ISO 13143 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 12813
  • ISO 13143-1:2016 Part 1: Test suite structure and test purposes
  • ISO 13143-2:2016 Part 2: Abstract test suite
• ISO/TR 13154:2017 Medical electrical equipment – Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph
• ISO/IEC 13156:2011 Information technology – Telecommunications and information exchange between systems – High rate 60 GHz PHY, MAC and PALs
• ISO/IEC 13157 Information technology – Telecommunications and information exchange between systems – NFC Security
  • ISO/IEC 13157-1:2014 Part 1: NFC-SEC NFCIP-1 security services and protocol
  • ISO/IEC 13157-2:2016 Part 2: NFC-SEC cryptography standard using ECDH and AES
  • ISO/IEC 13157-3:2016 Part 3: NFC-SEC cryptography standard using ECDH-256 and AES-GCM
  • ISO/IEC 13157-4:2016 Part 4: NFC-SEC entity authentication and key agreement using asymmetric cryptography
  • ISO/IEC 13157-5:2016 Part 5: NFC-SEC entity authentication and key agreement using symmetric cryptography
• ISO 13160:2012 Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting
• ISO 13161:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
• ISO 13162:2011 Water quality - Determination of carbon 14 activity - Liquid scintillation counting method
• ISO 13163:2013 Water quality - Lead-210 - Test method using liquid scintillation counting
• ISO 13164 Water quality - Radon-222
  • ISO 13164-1:2013 Part 1: General principles
  • ISO 13164-2:2013 Part 2: Test method using gamma-ray spectrometry
  • ISO 13164-3:2013 Part 3: Test method using emanometry
  • ISO 13164-4:2015 Part 4: Test method using two-phase liquid scintillation counting
• ISO 13165 Water quality - Radium-226
  • ISO 13165-1:2013 Part 1: Test method using liquid scintillation counting
  • ISO 13165-2:2014 Part 2: Test method using emanometry
  • ISO 13165-3:2016 Part 3: Test method using coprecipitation and gamma-spectrometry
• ISO 13167:2015 Water quality - Plutonium, americium, curium and neptunium - Test method using alpha spectrometry
• ISO/IEC 13170:2009 Information technology - 120 mm (8,54 Gbytes per side) and 80 mm (2,66 Gbytes per side) DVD re-recordable disk for dual layer (DVD-RW for DL)
• ISO 13175 Implants for surgery – Calcium phosphates
  • ISO 13175-3:2012 Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes
• ISO 13179 Implants for surgery – Plasma-sprayed unalloyed titanium coatings on metallic surgical implants
  • ISO 13179-1:2014 Part 1: General requirements
• ISO 13183:2012 Intelligent transport systems – Communications access for land mobiles (CALM) – Using broadcast communications
• ISO 13184 Intelligent transport systems (ITS) – Guidance protocol via personal ITS station for advisory safety systems
  • ISO/TR 13184-1:2013 Part 1: General information and use case definitions
  • ISO 13184-2:2016 Part 2: Road guidance protocol (RGP) requirements and specification
• ISO 13185 Intelligent transport systems – Vehicle interface for provisioning and support of ITS services
  • ISO/TR 13185-1:2012 Part 1: General information and use case definition
  • ISO 13185-2:2015 Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface
• ISO/IEC 13187:2011 Information technology - Server management command line protocol (SM CLP) specification
• ISO/TR 13195:2015 Selected illustrations of response surface method - Central composite design
• ISO 13200:1995 Cranes - Safety signs and hazard pictorials - General principles
• ISO 13203:2005 Chains, sprockets and accessories - List of equivalent terms
• ISO/IEC 13210:1999 Information technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards
• ISO/IEC 13211 Information technology - Programming languages - Prolog
  • ISO/IEC 13211-1:1995 Part 1: General core
  • ISO/IEC 13211-2:2000 Part 2: Modules
• ISO 13212:2014 Ophthalmic optics – Contact lens care products – Guidelines for determination of shelf-life
• ISO/IEC 13213:1994 Information technology - Microprocessor systems - Control and Status Registers (CSR) Architecture for microcomputer buses
• ISO 13225:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment; Height gauges – Design and metrological characteristics
• ISO/IEC TR 13233:1995 Information technology - Interpretation of accreditation requirements in ISO/IEC Guide 25 - Accreditation of Information Technology and Telecommunications testing laboratories for software and protocol testing services
• ISO/IEC 13235 Information technology - Open Distributed Processing - Trading function
  • ISO/IEC 13235-1:1998 Specification
  • ISO/IEC 13235-3:1998 Part 3: Provision of Trading Function using OSI Directory service
• ISO/IEC 13236:1998 Information technology - Quality of service: Framework
• ISO/IEC 13238 Information technology – Data Management
  • ISO/IEC 13238-3:1998 Part 3: IRDS export/import facility
• ISO/IEC 13239:2002 Information technology – Telecommunications and information exchange between systems – High-level data link control (HDLC) procedures
• ISO/IEC 13240:2001 Information technology - Document description and processing languages - Interchange Standard for Multimedia Interactive Documents (ISMID)
• ISO/IEC 13241:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Route Restriction Class additional network feature
• ISO/IEC 13242:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Route Restriction Class additional network feature
• ISO/IEC 13244:1998 Information technology - Open Distributed Management Architecture
• ISO/IEC 13246:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Signalling ATM adaptation layer
• ISO/IEC 13247:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Basic call/connection control
• ISO/IEC 13249 Information technology – Database languages – SQL multimedia and application
  • ISO/IEC 13249-1:2016 Part 1: Framework
  • ISO/IEC 13249-2:2003 Part 2: Full-Text
  • ISO/IEC 13249-3:2016 Part 3: Spatial
  • ISO/IEC 13249-5:2003 Part 5: Still image
  • ISO/IEC 13249-6:2006 Part 6: Data mining
  • ISO/IEC TS 13249-7:2013 Part 7: History
• ISO/IEC 13250 Information technology – Topic Maps^{[Note 3]}
• ISO/IEC 13251:2004 Collection of graphical symbols for office equipment
• ISO/IEC 13252:1999 Information technology – Enhanced communications transport service definition
• ISO 13261 Sound power rating of air-conditioning and air source heat pump equipment
  • ISO 13261-1:1998 Part 1: Non-ducted outdoor equipment
  • ISO 13261-2:1998 Part 2: Non-ducted indoor equipment
• ISO 13274:2013 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs
• ISO/TS 13278:2011 Nanotechnologies – Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
• ISO 13289:2011 Recreational diving services – Requirements for the conduct of snorkelling excursions
• ISO 13293:2012 Recreational diving services – Requirements for gas blender training programmes
• ISO 13300 Sensory analysis – General guidance for the staff of a sensory evaluation laboratory
  • ISO 13300-1:2006 Part 1: Staff responsibilities
  • ISO 13300-2:2006 Part 2: Recruitment and training of panel leaders
• ISO 13304 Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation
  • ISO 13304-1:2013 Part 1: General principles
• ISO 13307:2013 Microbiology of food and animal feed – Primary production stage – Sampling techniques
• ISO 13320:2009 Particle size analysis - Laser diffraction methods
• ISO 13325:2003 Tyres – Coast-by methods for measurement of tyre-to-road sound emission
• ISO/TR 13329:2012 Nanomaterials – Preparation of material safety data sheet (MSDS)
• ISO 13332:2000 Reciprocating internal combustion engines – Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet
• ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange
  • ISO/IEC 13346-1:1995 Part 1: General
  • ISO/IEC 13346-2:1999 Part 2: Volume and boot block recognition
  • ISO/IEC 13346-3:1999 Part 3: Volume structure
  • ISO/IEC 13346-4:1999 Part 4: File structure
  • ISO/IEC 13346-5:1995 Part 5: Record structure
• ISO 13347 Industrial fans – Determination of fan sound power levels under standardized laboratory conditions
  • ISO 13347-1:2004 Part 1: General overview
  • ISO 13347-2:2004 Part 2: Reverberant room method
  • ISO 13347-3:2004 Part 3: Enveloping surface methods
  • ISO 13347-4:2004 Part 4: Sound intensity method
• ISO 13349:2010 Fans - Vocabulary and definitions of categories
• ISO 13356:2015 Implants for surgery – Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
• ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods
• ISO 13372:2012 Condition monitoring and diagnostics of machines - Vocabulary
• ISO 13373 Condition monitoring and diagnostics of machines – Vibration condition monitoring
  • ISO 13373-1:2002 Part 1: General procedures
  • ISO 13373-2:2016 Part 2: Processing, analysis and presentation of vibration data
  • ISO 13373-3:2015 Part 3: Guidelines for vibration diagnosis
  • ISO 13373-7:2017 Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
  • ISO 13373-9:2017 Part 9: Diagnostic techniques for electric motors
• ISO 13374 Condition monitoring and diagnostics of machine systems – Data processing, communication and presentation^{[Note 3]}
  • ISO 13374-1:2003 Part 1: General guidelines
  • ISO 13374-2:2007 Part 2: Data processing
  • ISO 13374-3:2012 Part 3: Communication
  • ISO 13374-4:2015 Part 4: Presentation
• ISO 13379 Condition monitoring and diagnostics of machines – Data interpretation and diagnostics techniques
  • ISO 13379-1:2012 Part 1: General guidelines
  • ISO 13379-2:2015 Part 2: Data-driven applications
• ISO 13381 Condition monitoring and diagnostics of machines – Prognostics
  • ISO 13381-1:2015 Part 1: General guidelines
• ISO 13385 Geometrical product specifications (GPS) – Dimensional measuring equipment
  • ISO 13385-1:2011 Part 1: Callipers; Design and metrological characteristics
  • ISO 13385-2:2011 Part 2: Calliper depth gauges; Design and metrological characteristics
• ISO 13399 Cutting tool data representation and exchange
  • ISO 13399-1:2006 Part 1: Overview, fundamental principles and general information model
  • ISO/TS 13399-2:2014 Part 2: Reference dictionary for the cutting items
  • ISO/TS 13399-3:2014 Part 3: Reference dictionary for tool items
  • ISO/TS 13399-4:2014 Part 4: Reference dictionary for adaptive items
  • ISO/TS 13399-5:2014 Part 5: Reference dictionary for assembly items
  • ISO/TS 13399-50:2013 Part 50: Reference dictionary for reference systems and common concepts
  • ISO/TS 13399-60:2014 Part 60: Reference dictionary for connection systems
  • ISO/TS 13399-70:2016 Part 70: Graphical data layout - Layer setting for tool layout
  • ISO/TS 13399-71:2016 Part 71: Graphical data layout - Creation of documents for standardized data exchange: Graphical product information
  • ISO/TS 13399-72:2016 Part 72: Creation of documents for the standardized data exchange - Definition of properties for drawing header and their XML-data exchange
  • ISO/TS 13399-80:2017 Part 80: Creation and exchange of 3D models - Overview and principles
  • ISO/TS 13399-100:2008 Part 100: Definitions, principles and methods for reference dictionaries
  • ISO/TS 13399-150:2008 Part 150: Usage guidelines
  • ISO/TS 13399-201:2014 Part 201: Creation and exchange of 3D models - Regular inserts
  • ISO/TS 13399-202:2015 Part 202: Creation and exchange of 3D models - Irregular inserts
  • ISO/TS 13399-203:2015 Part 203: Creation and exchange of 3D models - Replaceable inserts for drilling
  • ISO/TS 13399-204:2016 Part 204: Creation and exchange of 3D models - Inserts for reaming
  • ISO/TS 13399-301:2013 Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies
  • ISO/TS 13399-302:2013 Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools
  • ISO/TS 13399-303:2016 Part 303: Creation and exchange of 3D models - Solid end mills
  • ISO/TS 13399-304:2016 Part 304: Creation and exchange of 3D models - Solid milling cutters with arbor hole
  • ISO/TS 13399-305:2017 Part 305: Creation and exchange of 3D models - Modular tooling systems with adjustable cartridges for boring
  • ISO/TS 13399-307:2016 Part 307: Creation and exchange of 3D models - End mills for indexable inserts
  • ISO/TS 13399-308:2016 Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts
  • ISO/TS 13399-309:2016 Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts
  • ISO/TS 13399-310:2017 Part 310: Creation and exchange of 3D models - Turning tools with carbide tips
  • ISO/TS 13399-311:2016 Part 311: Creation and exchange of 3D models - Solid reamers
  • ISO/TS 13399-312:2016 Part 312: Creation and exchange of 3D models - Reamers for indexable inserts
  • ISO/TS 13399-401:2016 Part 401: Creation and exchange of 3D models - Converting, extending and reducing adaptive items
  • ISO/TS 13399-405:2016 Part 405: Creation and exchange of 3D models - Collets
• ISO 13402:1995 Surgical and dental hand instruments – Determination of resistance against autoclaving, corrosion and thermal exposure
• ISO/IEC 13403:1995 Information technology - Information interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the CCS method
• ISO 13404:2007 Prosthetics and orthotics – Categorization and description of external orthoses and orthotic components
• ISO 13405 Prosthetics and orthotics – Classification and description of prosthetic components
  • ISO 13405-1:2015 Part 1: Classification of prosthetic components
  • ISO 13405-2:2015 Part 2: Description of lower limb prosthetic components
  • ISO 13405-3:2015 Part 3: Description of upper limb prosthetic components
• ISO 13406 Ergonomic requirements for work with visual displays based on flat panels
  • ISO 13406-2:2001 Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14]
• ISO 13407:1999 Human-centred design processes for interactive systems (This standard has been revised by ISO 9241-210:2010)
• ISO/IEC 13421:1993 Information technology – Data Interchange on 12,7 mm, 48-track magnetic tape cartridges – DLT 1 format
• ISO/IEC 13422:1994 Information technology – Data interchange on 90 mm Flexible Disk Cartridges 10 MByte capacity using sector servo tracking – ISO Type 304
• ISO 13444:2012 Technical product documentation (TPD) – Dimensioning and indication of knurling
• ISO 13448 Acceptance sampling procedures based on the allocation of priorities principle (APP)
  • ISO 13448-1:2005 Part 1: Guidelines for the APP approach
  • ISO 13448-2:2004 Part 2: Coordinated single sampling plans for acceptance sampling by attributes
• ISO 13450 Photography – 110-size cartridge, film and backing paper – Dimensions
• ISO/TS 13471 Acoustics – Temperature influence on tyre/road noise measurement
  • ISO/TS 13471-1:2017 Part 1: Correction for temperature when testing with the CPX method
• ISO 13472 Acoustics – Measurement of sound absorption properties of road surfaces in situ
  • ISO 13472-1:2002 Part 1: Extended surface method
  • ISO 13472-2:2010 Part 2: Spot method for reflective surfaces
• ISO 13473 Characterization of pavement texture by use of surface profiles
  • ISO 13473-1:1997 Part 1: Determination of Mean Profile Depth
  • ISO 13473-2:2002 Part 2: Terminology and basic requirements related to pavement texture profile analysis
  • ISO 13473-3:2002 Part 3: Specification and classification of profilometers
  • ISO/TS 13473-4:2008 Part 4: Spectral analysis of surface profiles
  • ISO 13473-5:2009 Part 5: Determination of megatexture
• ISO 13474:2009 Acoustics – Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment
• ISO 13475 Acoustics – Stationary audible warning devices used outdoors
  • ISO 13475-1:1999 Part 1: Field measurements for determination of sound emission quantities
  • ISO/TS 13475-2:2000 Part 2: Precision methods for determination of sound emission quantities
• ISO/IEC 13481:1993 Information technology - Data interchange on 130 mm optical disk cartridges - Capacity: 1 gigabyte per cartridge
• ISO 13482:2014 Robots and robotic devices – Safety requirements for personal care robots
• ISO 13485:2016 Medical devices – Quality management systems – Requirements for regulatory purposes
• ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange
  • ISO/IEC 13490-1:1995 Part 1: General
  • ISO/IEC 13490-2:1995 Part 2: Volume and file structure
• ISO 13491 Financial services – Secure cryptographic devices (retail)
  • ISO 13491-1:2016 Part 1: Concepts, requirements and evaluation methods
  • ISO 13491-2:2017 Part 2: Security compliance checklists for devices used in financial transactions
• ISO 13492:2007 Financial services – Key management related data element – Application and usage of ISO 8583 data elements 53 and 96
• ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software
• ISO/IEC 13522 Information technology - Coding of multimedia and hypermedia information
  • ISO/IEC 13522-1:1997 Part 1: MHEG object representation - Base notation (ASN.1)
  • ISO/IEC 13522-3:1997 Part 3: MHEG script interchange representation
  • ISO/IEC 13522-4:1996 Part 4: MHEG registration procedure
  • ISO/IEC 13522-5:1997 Part 5: Support for base-level interactive applications
  • ISO/IEC 13522-6:1998 Part 6: Support for enhanced interactive applications
  • ISO/IEC 13522-7:2001 Part 7: Interoperability and conformance testing for ISO/IEC 13522-5
  • ISO/IEC 13522-8:2001 Part 8: XML notation for ISO/IEC 13522-5
• ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
• ISO 13539:1998 Earth-moving machinery – Trenchers – Definitions and commercial specifications
• ISO/IEC 13549:1993 Information technology - Data interchange on 130 mm optical disk cartridges - Capacity: 1,3 gigabytes per cartridge
• ISO 13550:2002 Hydrometric determinations – Flow measurements in open channels using structures – Use of vertical underflow gates and radial gates
• ISO 13559:2002 Butter, fermented milks and fresh cheese – Enumeration of contaminating microorganisms – Colony-count technique at 30 degrees C
• ISO/IEC 13560:2009 Information technology – Telecommunications and information exchange between systems – Procedure for the registration of assigned numbers for ISO/IEC 26907 and ISO/IEC 26908
• ISO/IEC TR 13561:1994 Information technology - Guidelines for effective use of optical disk cartridges conforming to ISO/IEC 10090
• ISO 13565 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties
  • ISO 13565-1:1996 Part 1: Filtering and general measurement conditions
  • ISO 13565-2:1996 Part 2: Height characterization using the linear material ratio curve
  • ISO 13565-3:1998 Part 3: Height characterization using the material probability curve
• ISO 13567 Technical product documentation – Organization and naming of layers for CAD
• ISO/IEC 13568:2002 Information Technology – Z formal specification notation – Syntax, type system and semantics
• ISO/TR 13569:2005 Financial services – Information security guidelines
• ISO 13574:2015 Industrial furnaces and associated processing equipment - Vocabulary
• ISO/IEC 13575:1995 Information technology – Telecommunications and information exchange between systems – 50-pole interface connector mateability dimensions and contact number assignments
• ISO 13577 Industrial furnaces and associated processing equipment - Safety
  • ISO 13577-1:2016 Part 1: General requirements
  • ISO 13577-2:2014 Part 2: Combustion and fuel handling systems
  • ISO 13577-3:2016 Part 3: Generation and use of protective and reactive atmosphere gases
  • ISO 13577-4:2014 Part 4: Protective systems
• ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency
  • ISO 13579-1:2013 General methodology
  • ISO 13579-2:2013 Reheating furnaces for steel
  • ISO 13579-3:2013 Batch-type aluminium melting furnaces
  • ISO 13579-4:2013 Furnaces with protective or reactive atmosphere
• ISO/TS 13582:2015 Health informatics – Sharing of OID registry information
• ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) – Linear elastic fracture mechanics (LEFM) approach
• ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty
• ISO/IEC TR 13594:1995 Information technology – Lower layers security
• ISO 13606 Health informatics – Electronic health record communication
  • ISO 13606-1:2008 Part 1: Reference model
  • ISO 13606-2:2008 Part 2: Archetype interchange specification
  • ISO 13606-3:2009 Part 3: Reference archetypes and term lists
  • ISO/TS 13606-4:2009 Part 4: Security
  • ISO 13606-5:2010 Part 5: Interface specification
• ISO 13611:2014 Interpreting - Guidelines for community interpreting
• ISO/IEC 13614:1995 Information technology - Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method
• ISO 13616 Financial services – International bank account number (IBAN)
• ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems
  • ISO 13628-1:2005 Part 1: General requirements and recommendations
  • ISO 13628-2:2006 Part 2: Unbonded flexible pipe systems for subsea and marine applications
  • ISO 13628-3:2000 Part 3: Through flowline (TFL) systems
  • ISO 13628-4:2010 Part 4: Subsea wellhead and tree equipment
  • ISO 13628-5:2009 Part 5: Subsea umbilicals
  • ISO 13628-6:2006 Part 6: Subsea production control systems
  • ISO 13628-7:2005 Part 7: Completion/workover riser systems
  • ISO 13628-8:2002 Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems
  • ISO 13628-9:2000 Part 9: Remotely Operated Tool (ROT) intervention systems
  • ISO 13628-10:2005 Part 10: Specification for bonded flexible pipe
  • ISO 13628-11:2007 Part 11: Flexible pipe systems for subsea and marine applications
  • ISO 13628-15:2011 Part 15: Subsea structures and manifolds
• ISO/IEC 13642:1999 Information technology – Elements of management information related to the OSI Physical Layer
• ISO 13653:1996 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field
• ISO 13666:2012 Ophthalmic optics - Spectacle lenses - Vocabulary
• ISO/IEC 13673:2000 Information technology - Document processing and related communication - Conformance testing for Standard Generalized Markup Language (SGML) systems
• ISO 13687 Tourism and related services – Yacht harbours
  • ISO 13687-1:2017 Part 1: Minimum requirements for basic service level harbours
  • ISO 13687-2:2017 Part 2: Minimum requirements for intermediate service level harbours
  • ISO 13687-3:2017 Part 3: Minimum requirements for high service level harbours
• ISO 13694:2015 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power (energy) density distribution
• ISO 13695:2004 Optics and photonics – Lasers and laser-related equipment – Test methods for the spectral characteristics of lasers
• ISO 13696:2002 Optics and optical instruments – Test methods for radiation scattered by optical components
• ISO 13697:2006 Optics and photonics – Lasers and laser-related equipment – Test methods for specular reflectance and regular transmittance of optical laser components
• ISO 13702 Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines
• ISO/IEC 13712 Information technology – Remote Operations
  • ISO/IEC 13712-1:1995 Concepts, model and notation
  • ISO/IEC 13712-2:1995 OSI realizations – Remote Operations Service Element (ROSE) service definition
  • ISO/IEC 13712-3:1995 OSI realizations – Remote Operations Service Element (ROSE) protocol specification
• ISO/IEC 13714:1995 Information technology – Document processing and related communication – User interface to telephone-based services – Voice messaging applications
• ISO 13715:2017 Technical product documentation—Edges of undefined shape—Indication and dimensioning
• ISO 13716:1999 Dentistry — Reversible-irreversible hydrocolloid impression material systems [Withdrawn: replaced with ISO 21563]
• ISO/IEC 13719 Information technology - Portable Common Tool Environment (PCTE)
  • ISO/IEC 13719-1:1998 Part 1: Abstract specification
  • ISO/IEC 13719-2:1998 Part 2: C programming language binding
  • ISO/IEC 13719-3:1998 Part 3: Part 3: Ada programming language binding
  • ISO/IEC 13719-4:1998 Part 4: IDL binding (Interface Definition Language)
• ISO 13720:2010 Meat and meat products – Enumeration of presumptive Pseudomonas spp.
• ISO 13722:2017 Microbiology of the food chain – Enumeration of Brochothrix spp. – Colony-count technique
• ISO 13731:2001 Ergonomics of the thermal environment - Vocabulary and symbols
• ISO 13732 Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces
  • ISO 13732-1:2006 Part 1: Hot surfaces
  • ISO/TS 13732-2:2001 Part 2: Human contact with surfaces at moderate temperature
• ISO/IEC 13751:2001 Information technology - Programming languages, their environments and system software interfaces - Programming language Extended APL
• ISO 13766:2006 Earth-moving machinery – Electromagnetic compatibility
• ISO 13779 Implants for surgery – Hydroxyapatite
  • ISO 13779-2:2008 Part 2: Coatings of hydroxyapatite
  • ISO 13779-3:2008 Part 3: Chemical analysis and characterization of crystallinity and phase purity
  • ISO 13779-4:2002 Part 4: Determination of coating adhesion strength
  • ISO 13779-6:2015 Part 6: Powders
• ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing
• ISO 13782:1996 Implants for surgery – Metallic materials – Unalloyed tantalum for surgical implant applications
• ISO/IEC 13800:1996 Information technology - Procedure for the registration of identifiers and attributes for volume and file structure
• ISO 13810:2015 Tourism services – Industrial tourism – Service provision
• ISO/TS 13811:2015 Tourism and related services – Guidelines on developing environmental specifications for accommodation establishments
• ISO/IEC 13816:2007 Information technology - Programming languages, their environments and system software interfaces - Programming language ISLISP
• ISO/IEC 13817 Information technology - Programming languages, their environments and system software interfaces - Vienna Development Method - Specification Language
  • ISO/IEC 13817-1:1996 Part 1: Base language
• ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information
• ISO/TS 13830:2013 Nanotechnologies – Guidance on voluntary labelling for consumer products containing manufactured nano-objects
• ISO 13837 Road vehicles – Safety glazing materials – Method for the determination of solar transmittance
• ISO/IEC TR 13841:1995 Information technology - Guidance on measurement techniques for 90 mm optical disk cartridges
• ISO/IEC 13842:1995 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2 Gbytes per cartridge
• ISO 13843:2017 Water quality – Requirements for establishing performance characteristics of quantitative microbiological methods
• ISO 13849 Safety of machinery – Safety related parts of control systems
• ISO 13850:2015 Safety of machinery – Emergency stop function – Principles for design
• ISO 13854:2017 Safety of machinery – Minimum gaps to avoid crushing of parts of the human body
• ISO 13855:2010 Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body
• ISO 13860:2016 Machinery for forestry – Forwarders – Terms, definitions and commercial specifications
• ISO 13861:2000 Machinery for forestry – Wheeled skidders – Terms, definitions and commercial specifications
• ISO 13862:2000 Machinery for forestry – Feller-bunchers – Terms, definitions and commercial specifications
• ISO/IEC 13863:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Path replacement additional network feature
• ISO/IEC 13864:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Name identification supplementary services
• ISO/IEC 13865:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Transfer supplementary service
• ISO/IEC 13866:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call completion supplementary services
• ISO/IEC 13868:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Name identification supplementary services
• ISO/IEC 13869:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Transfer supplementary service
• ISO/IEC 13870:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Completion supplementary services
• ISO/IEC 13871:1995 Information technology – Telecommunications and information exchange between systems – Private telecommunications networks – Digital channel aggregation
• ISO/IEC 13872:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Diversion supplementary services
• ISO/IEC 13873:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Diversion supplementary services
• ISO/IEC 13874:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Path Replacement additional network feature
• ISO/IEC 13886:1996 Information technology - Language-Independent Procedure Calling (LIPC)
• ISO/IEC 13888 Information technology - Security techniques - Non-repudiation
  • ISO/IEC 13888-1:2009 Part 1: General
  • ISO/IEC 13888-2:2010 Part 2: Mechanisms using symmetric
  • ISO/IEC 13888-3:2009 Part 3: Mechanisms using asymmetric techniques
• ISO 13920:1996 Welding – General tolerances for welded constructions – Dimensions for lengths and angles – Shape and position
• ISO/IEC 13923:1996 Information technology – 3,81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-2 format using 120 m length tape
• ISO 13926 Pen systems
  • ISO 13926-1:2004 Part 1: Glass cylinders for pen-injectors for medical use
  • ISO 13926-2:2011 Part 2: Plunger stoppers for pen-injectors for medical use
  • ISO 13926-3:2012 Part 3: Seals for pen-injectors for medical use
• ISO 13940:2015 Health informatics – System of concepts to support continuity of care
• ISO 13943:2017 Fire safety - Vocabulary
• ISO 13958:2014 Concentrates for haemodialysis and related therapies
• ISO 13959:2014 Water for haemodialysis and related therapies
• ISO 13960:2010 Cardiovascular implants and extracorporeal systems – Plasmafilters
• ISO/IEC 13961:2000 Information technology - Scalable Coherent Interface (SCI)
• ISO/IEC 13962:1995 Information technology – Data interchange on 12,7 mm, 112-track magnetic tape cartridges – DLT 2 format
• ISO/IEC 13963:1995 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 230 megabytes per cartridge
• ISO 13969:2003 Milk and milk products – Guidelines for a standardized description of microbial inhibitor tests
• ISO 13970:2011 Recreational diving services – Requirements for the training of recreational snorkelling guides
• ISO/TS 13972:2015 Health informatics – Detailed clinical models, characteristics and processes
• ISO/TR 13973:2014 Artificial recharge to groundwater
• ISO 13990 Textile machinery and accessories – Yarn feeders and yarn control for knitting machines
  • ISO 13990-1:2006 Part 1: Vocabulary

Notes[edit]

References[edit]

External links[edit]

• International Organization for Standardization
• ISO Certification Provider
• ISO Consultant